TIMap-927  > ACT7200L50RJ-U.ACT7200L15RJ-7

suppliers of ACT7200L50RJ-U.ACT7200L15RJ-7 and PDF data of ACT7200L50RJ-U.ACT7200L15RJ-7

Part Numbert Mfg Packt D/C Descriptiont Qty Company/Contact  
ACT7200L50RJ-U.ACT7200L15RJ-7 TI  PLCC32  93.95  our own stock  100 
    HK CHISHING ELECTRONICS COM
  • Contact:Maggielee
  • Tel:86-755-61303995
  • Fax:86-755-61306028
  • Email: maggielee@zcicgs.com.cn
ACT7200L50RJ-U.ACT7200L15RJ-7 TI  our own st  93.95    PLCC32 
    HK CHISHING ELECTRONICS CO.,
  • Contact:maggielee
  • Tel:86-755-61303995
  • Fax:86-755-61306028
  • Email: maggielee@zcicgs.com.cn
ACT7200L50RJ-U.ACT7200L15RJ-7 TI  93.95  PLCC32  ourownstock  100 
    hkchishingelectronicscompany
  • Contact:Ms.LeeMaggie
  • Tel:86-755-83569271
  • Fax:86-755-83569312
  • Email: maggielee@zcicgs.com.cn

ACT7200L50RJ-U.ACT7200L15RJ-7 Datasheet
Triangle and Square Wave Generator The circuit of Figure 13 uses a positive feedback loop closed around a combined comparator and integrator. When power is applied the output of the comparator will switch to one of two states, to the maximum positive or maximum negative voltage. This applies a peak input signal to the integrator, and the integrator output will ramp either down or up, oppo- site of the input signal. When the integrator output (which is connected to the comparator input) reaches a threshold set by Rl and R2, the comparator will switch to the opposite polar ity. This cycle will repeat endlessly, the integrator charging
ACT7200L50RJ-U.ACT7200L15RJ-7 Price
For wide input, dynamic range applications, the AD8370 pro- vides two input ranges: high gain mode and low gain mode.A vernier 7-bit transconductance (Gm) stage provides 28 dB of gain range at better than 2 dB resolution, and 22 dB of gain range at better than l dB resolution.A second gain range, 17 dB higher than the first, can be selected to provide improved noise performance.
ACT7200L50RJ-U.ACT7200L15RJ-7 on stock

Hitachi Code SPAK
lJEDEC
lEIAJ
Weight (reference value) 0.10 a


SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNIT
-VLG Inductive load turn-off Negative load voltagel VIG = 0 V; IL = 7.5 A; tp = 300 ~s ' J 1 5 20 25 v
td se IL Short circuit load protection2 Response time Load current prior to turn-off VIG = 5 V; RL " io ml t < td se 90 42 c(S A
IL(lim) Overload protection3 Load current limiting VBL = 9 V; tp = 300 ~s 28 40 52 A