CXK5V16100TM，there are the best CXK5V16100TM suppiers all over the world here.These are the list and detailed contact method of CXK5V16100TM suppliers all over the world as follows.You can buy or get informations of CXK5V16100TM through email , message or tel.

suppliers of CXK5V16100TM and PDF data of CXK5V16100TM

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

CXK5V16100TM Datasheet

			TEST			t_IMITS
SYMBOL	PARAMETER		CONOITlONS2			MIN	TYP.	MAX	UNIT
					VEE= -4.2V	-1020		-870	mV
VOH	High level output voltage			Inputs at VIHUAX or VLUW	VEE= -4.5V	-1025	-955	-880	mV
VOH	High level output voltage			Inputs at VIHUAX or VLUW	vu:= -4.8V	-1035		-880	mV
				Apply VIHMIN or ViLMAX to one	VEE -4 2V	-1030			mV
VOHT	High level output threshold voltage		Outputs	input at a time. Other inputs	VEE -4.5V	-1035			mV
VOHT	High level output threshold voltage		loaded	at VIHMAX or VILMIN	VEE= -4.8V	-1045			mV
			with 50Q	Apply VIHUIIN or VILMAX to one	VEE= -4.2V			-1595	mV
VOLT	Low level output threshold voltage		to -2.OV	input at a time. Other inputs	VEE= -4.5V			-1610	mV
VOLT	Low level output threshold voltage		±0.010V	at VIHMAX or VILMIN	VEE= -4.8V			-1610	mV
					VEE= -4.2V	-1810		-1605	mV
VOL	Low level outpui voltage			Inputs at VIHMAXor VIUUIN	VEE= -4.5V	-1810	-1705	-1620	mV
VOL	Low level outpui voltage			Inputs at VIHMAXor VIUUIN	VEE= -4 8V	-1830		-1620	mV
		Dn, CPn						240
I¨	High levelinput	MCP, MS, MR	One input under test at VHrjAX.					450	yA
I¨	current	RnSn	Other inputs at VILMirN					530
IL	Lowlevelinput current		One input under test at VILUIN Other inputs at VIHMAX			0 5
-IEE	VeE supply current		Allinputs al VIHMAX			74	110	149	mA

CXK5V16100TM Price

aV1

dIF/dt(A/lJs) III

CXK5V16100TM on stock

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Operation Control This functional block stores configuration and operation commands from the CPU and generates appropriate signals to various internal sections to control the overall device operation. It contains read and write circuits to permit communications with the microprocessor via the data bus and contains mode registers l and 2, the command register, and the status register. Details of register addressing and protocol are presented in the EPCI programming section of this data sheet.

Suppliers Datasheet
		Exact Matc