| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| CY7C261-25WCB | CYPRESS | IN STOCK | 548 |
|
|||
| CY7C261-25WCB | CY | 2 |
|
||||
| CY7C261-25WCB | CYPRESS | 548 |
|
||||
| CY7C261-25WCB | CY | DIP | 4150 |
|
|||
| CY7C261-25WCB | CY | 3 | DIP |
|
CY7C261-25WCB Datasheet
CY7C261-25WCB Price 13 L7417 -- 12.0 50 900 3,000 2,000 Any C-Bar-6 4.2 x 2.5 11.0 44.0 30.0 GY6.35 B 14 L7389A -- 12.0 50 900 3,000 2,000 Any C-6 4.2 x 1.5 11.0 44.0 30.0+0.25 GY6.35 B CY7C261-25WCB on stock The parity (PARITY) pin is an output from the generator/checker when transmitting from the port A to B (T/R = high) and an input when receiving from port B to A port ( T/R = low). When transmitting (T/R = high) the parity select (ODD/EVEN) input is set, then the A port data is polled to determined the number of high bits. The parity (PARITY) output then goes to the logic state determined by the parity select (ODD/EVEN) setting and by the number of high bits on port A. For example, if the parity select (ODD/EVEN) is set low (even parity), and the number of high bits on port A is odd, then the parity (PARITY) output will be high, transmitting even parity. If the number of high bits on port A is even, then the parity (PARITY) output will be low, keeping even parity.
(depends upon the cross sectional area of connecting lead and the clamped article) Insulation coordination 6 kV/2 Test voltage 3250 V Only for handle part and safety socket. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
