DM15-200J，there are the best DM15-200J suppiers all over the world here.These are the list and detailed contact method of DM15-200J suppliers all over the world as follows.You can buy or get informations of DM15-200J through email , message or tel.

suppliers of DM15-200J and PDF data of DM15-200J

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

DM15-200J Datasheet

this condition is satisfied,the reset pulse generator forces the reset outputs to active states. The reset signals will remain active for a minimum of 250ms from the moment the push-button reset input is released from logiclowlevel (see TIMING DIAGRAM).
DM15-200J Price

Symbol	Parameter	Test Conditions	Min	Typ.	Max	Unit
ISD ISDM (2)	Source-drain Current Source-drain Current (pulsed)				4 16	A A
VSD (1)	Forward On Voltage	ISD = 4 A, VGS = 0			1.5	V
trr Qrr IRRM	Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current	ISD = 5 A, di/dt = 100A/ps, VDD = 100V, Tj = 1500C (see test circuit, Figure 5)		180 800 9		ns nC A

DM15-200J on stock

3. Once location passes "Step 2", apply 11X overprogram- ming, i.e., apply eleven times the number ofpulses that were required to program the location. This will guarantee a solid programming margin. The overprogramming should be made "software program- mable" for easy updates. 4. Program all locations. 5. Verify all locations (using speed verify mode) at VDD = VDDrriin

2.2 Erratum Work Around When creating a configuration EEPROM, the following data bytes must be written as the initial configuration data, starting at location Ox10 and ending at location Ox28. This sequence of data bytes activates an internal correction for the EEPROM loader error.

Suppliers Datasheet
		Exact Matc