MX27C512TI-45 Datasheet Phase distortion can be caused by any amplitude or frequency sensitive components, such as ceramic capacitors or high-Q inductors, and is usually present in multi-stage amplifiers. This distortion may have a positive or negative sign, resulting in occasions where the level of some of the final IMD products (d3 0r ds, or both) may be lower than that of the driving signal, due to canceling effects of opposite phases. Actual levels depend on the relative magnitude of each distortion product present. From the above it is apparent that the distortion figures presented by the spectrum analyzer represent a combination of amplitude, harmonic and phase distortion. MX27C512TI-45 Price| PARAMETER | TEST CONDITIONS | MIN TYP MAX | UNITS | | IDD Supply current | Full load | All outputs enabled and terminated with 50 Q to VDD - 2 V on LVPECL outputs and 10 pF on LVCMOS output, f = 800 MHz for LVPECL outputs and 200 MHz for LVCMOS, VDD = 3.3 V | 100 | mA | | No load | Outputs enabled, no output load,f = 800 MHz for LVPECL outputs and 200 MHz for LVCMOS, VDD = 3.6 V | 85 | | IDDZ Supply current, 3-s | ate | All outputs 3-state by control logic, f = 0 Hz, VDD = 3.6 V | 0.5 | mA | | | | | |
MX27C512TI-45 on stock| | | | | | | | | iOmP | | | | | | | | 30mP ZOmP | | | | | | | | lOmP 5mP | | | | = | | | | | | | | | | | | | | | | | | | | | | | | | |
| Characteristic | Value | | Operating temperature | -65 0C to +1 50 0C | | Storage temperature | -65 0C to +200 0C | | Power dissipation (derate linearly to zero @ 175 0C) | 250 mW | | Typical lead strength | 8 grams pull | | |
|
