| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
MX27L2000QC-15 Datasheet
MX27L2000QC-15 Price As in the narrow case, DPOUTCK+ will never assert twice in 8 0r 10 DCKIN+ cycles. Should a DFMIN+ assertion change the MDM's 8 0r 10 bit boundary, DPOUTCK+ assertion will be delayed and there will never be a short assertion. For 8 bit output, DP4+ and DP9 are not used. The following table summarizes the available bit widths. The right column shows the parallel bits, in sequence from first in serially, to last in. MX27L2000QC-15 on stock Notes. Insulating bushes and solder tags are available for the items indicated but the bushes limit the available thread and require a ditferent cut-out (see mounting detail for bush), dimension D is thus reduced - see (D) NB the basic item uses 999 X99 as a filler code here - but to indicate the addition of a solder tag or insulating bush, use the following numbers in their place. Note l indicates a product which can take a thccker bush (see page 39). -001 X99=with solder tag only -002 X99=with solder tag and insulating bushes (as shown above) -003 X99=with insulating bushes only (as shown above) -004 X99=with solder tag and alternative insulating bushes (see page 39) -005 X99=with alternative insulating bushes only (see page 39) 2 these items have two flats @ 900, on the body, to allow orientation of the connector in the panel 3 Solder tags (only) are available as an accessory to this item - enter '001 X99' in the part number Replace the ' in the part number with the required plating code, see page 8 for details Preferred items Please contact the Sales Oftice for any uncatalogued requirements
|
||||||||||||
