MX536ASH-883B，there are the best MX536ASH-883B suppiers all over the world here.These are the list and detailed contact method of MX536ASH-883B suppliers all over the world as follows.You can buy or get informations of MX536ASH-883B through email , message or tel.

suppliers of MX536ASH-883B and PDF data of MX536ASH-883B

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

MX536ASH-883B Datasheet

Parameter	Rating	Unit
Supply Voltage (RF off) Supply Voltage (POUT<31dBm) Control Voltage (VREG) Input RF Power Mode Voltage (VMODE) Operating Temperature Storage Temperature Moisture Sensitivity Level (IPC/JEDEC J-STD-20)	+8.0 +5.2 +3.9 +10 +3.9 -30 to +110 -40 to +150 MSL 2 @ 260 0C	V V V dBm V oC oc

MX536ASH-883B Price

	I
VCBO	]p-	- 30	V
VEBO	-y^	-d	V
VCEO	]-·-y	- 25	V
ICM	j L	-1.5	A
I c	]	-1	A
Pe	]pTa =25C	900	mW
Tj		+150	C
Tstg		55 - +150	c

MX536ASH-883B on stock

There is always some charge being thermally generated in the CCD stages; this process is called leakage. Leakage charge is transferred down the delay line along with the input signal samples, adding to them. Excess leakage will swamp out the signal samples, attenuating - or wiping out - the delayed output. Leakage can also make the output DC bias more negative, requir~ng a more-positive input DC bias to keep the

In applications where there is a significant variation in load current, the VIN terminal voltage may vary, as shown in figure 4. This is due to peak charging of C2. In this case, adding a resistor in the range ofa few ohms to tens of ohms in series with the rectifier diode D2 will bring the voltage variation within limits.

Suppliers Datasheet
		Exact Matc