| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
MX7548SQ-883B Datasheet
MX7548SQ-883B Price The operations of the EN29LV512 are selected by one or more commands written into the command register to perform Read/Reset Memory, Read ID, Read Sector Protection, Program, Sector Erase, Chip Erase, Erase Suspend and Erase Resume. Commands are made up of data sequences written at specific addresses via the command register. The sequences for the specified operation are defined in the Command Definitions table (Table 5). Incorrect addresses, incorrect data values or improper sequences will reset the device to Read Mode. MX7548SQ-883B on stock voltage HVc is clamped at an internally set value Vcl, typically 380V. The transition from saturation to desaturation, coil current limiting phase, must have the ability to accomodate an overvoltage. A maximum overshoot of 20V is allowed. FEEDBACK When the collector current exceeds 4.5A, the feedback signal is turned high and it remains so, until the input voltage is turned-off. OVERVOLTAGE The VB025SP can withstand the following transients of the battery line: -100V/2msec (Ri = 10 I ) +100V/0.2msec (Ri = 10 I ) +50V/400msec (Ri = 4.2 I , with VIN = 3 V)
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
