| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
MX929E2 Datasheet
MX929E2 Price All rights reserved. Copyright1999 Elm Electronics. Every effort is made to verify the accuracy of information provided in this document, but no representation or warranty can be given and no liability assumed by Elm Electronics with respect to the accuracy and/or use of any products or information described in this document. Elm Electronics will not be responsible for any patent infringements arising from the use of these products or information, and does not authorize or warrant the use of any Elm Electronics product in life support devices and/or systems. Elm Electronics reserves the right to make changes to the device(s) described in this document in order to improve reliability, function, or design. MX929E2 on stock
The output capacitor i.s part of the regulator's frequency compen- .sation system. Many types of capacitor.s are available, with different capacitance value tolerance.s, capacitance temperature coefficient.s, and equivalent serie.s impedances. For all operating condition.s, connection of a 220pF aluminum electrolytic capacitor or a 47pF .solid tantalum capacitor between the output terminal and ground will guarantee .stable operation. If a bypas.s capacitor i.s connected between the output voltage adjust (ADJ) pin and ground, ripple rejection will be improved (plea.se .see the section entitled "RIPPLE REJECTION"). When ADJ pin bypassing is used, the required output capacitor value increase.s. Output capacitor value.s of 220pF (aluminum) or 47pF (tantalum) provide for all ca.ses of bypas.sing the ADJ pin. If an ADJ pin bypa.ss capacitor is not used, smaller output capacitor value.s are adequate. The table below.show.s recommended minimum capacitance values for .stable operation. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
