MX93132FC-N4-0139 Datasheet Ambient Ambient Temperature Temperature Pkg. 700C250C Pkg. 700C250C 4604H 0.80 1.00 4610H 2.00 2.50 4605H 1.00 1.25 4611H 2.20 2.75 4606H 1.20 1.50 4612H 2.40 3.00 4607H 1.40 1.75 4613H 2.60 3.25 4608H 1.60 2.00 4614H 2.80 3.50 4609H 1.80 2.25 MX93132FC-N4-0139 Price| | | | 74AHCIG | 74AHCTIG | | | SYMBOL | PARAMETER | CONDITIONS | MIN | TYP | MAX | MIN | TYP. | MAX | UNIT | | Vcc | supply voltage | | 2.0 | 5.0 | 5.5 | 4.5 | 5.0 | 5.5 | V | | VI | input voltage | | 0 | | 5.5 | 0 | | 5.5 | V | | VO | output voltage | | 0 | | Vcc | 0 | | Vcc | V | | Tamb | ambient temperature | see DC and AC characteristics per device | -40 | +25 | +125 | -40 | +25 | +125 | IC | | ltf | input rise and fall | Vcc = 3.3 +0.3 V | | | 100 | | | | nsN | | times | Vcc=5+0.5 V | | | 20 | | | 20 | nsN | | | | | | | | | | |
MX93132FC-N4-0139 on stock| PART NUMBER PACKAGE OUTLINE | NESG2101M16 M16 | | SYMBOLS | PARAMETERS AND CONDITIONS | UNITS | MIN | TYP | MAX | | | PldB | Output Power at l dB Compression Point VCE = 3.6 V, lco = 10 mA, f = 2 GHz, Zs = ZSOPT, ZL = ZLOPT | dBm | | 21 | | | GL | Linear Gain, VCE = 3.6 V, lco = 10 mA, f = 2 GHz, | dB | | 15 | | | NF | Noise Figure at VCE = 2 V, lc = 10 mA, f = 2 GHz, Zs = ZSOPT, ZL = ZLOPT | dB | | 0 9 | 1 2 | | Ga | Associated Gain at VCE = 2 V, lc = 10 mA, f = 2 GHz, Zs = ZSOPT, ZL = ZLOPT | dB | 11.0 | 13 0 | | | LL | NF | Noise Figure at VCE = 2 V, lc = 7mA, f = 1 GHz, Zs = ZSOPT, ZL = ZLOPT | dB | | 0 6 | | | Ga | Associated Gain at VCE = 2 V, lc = 7 mA, f = 1 GHz, Zs = ZSOPT, ZL = ZLOPT | dB | | 19 0 | | | MSG | Maximum Stable Gaini at VCE = 3 V, lc = 50 mA, f = 2 GHz | dB | 14 5 | 17 0 | | | IS21 El2 | Insertion Power Gain at VCE = 3 V, lc = 50 mA, f = 2 GHz | dB | 11.5 | 13 5 | | | fT | Gain Bandwidth Product at VCE = 3 V, lc = 50 mA, f = 2 GHz | GHz | 14 | 17 | | | Cre | Reverse Transfer Capacitance2 at VCB = 2 V, IE = 0 mA, f = 1 MHz | pF | | 0.4 | 0 5 | | | ICBO | Collector Cutoff Current at VCB = 5V, IE = 0 | nA | | | 100 | | o | IEBO | Emitter Cutoff Current at VEB = 1 V, lc = 0 | nA | | | 100 | | | hFE | DC Current Gain3 at VCE = 2 V, lc = 15 mA | | 130 | 190 | 260 | | | | | | | |
| Pin Name | I/O | Description | Pad/Pin No. | | SG40 SG30 SG29, SG 28 SG27 SG9 SG8 SG1 | O | Segment Driver Output Pins | 89 99 5 N 23 1,3 30 37 | | SEGG | | OLED Drive Power Supply (OV) | 38 | | REFOUT | O | Reference Current Output Pin | 39 | | V16 | | OLED Drive Power Supply (16V) | 40, 88 | | VSS | | Ground Pin (OV) | 41, 42, 65 | | OSC1 | I | Oscillator Input Pin | 43 | | OSC2 | O | Oscillator Output Pin | 44 | | BVR | I | Brightness Control Input Pin | 45 | | DVR | I | Precharge Time ControlInput Pin | 46 | | LAT | O | Latch Clock Output Pin | 47 | | CL | O | Shift Clock Output Pin | 48 | | VDD | | Power Supply (2.7V t0 5.5V) | 49 | | DISB | O | Reset Signal Output Pin | 50 | | D | O | Character Pattem Data Output Pin | 51 | | RS | I | Register Select Input Pin When this pin is set to "0", it is used as an Instruction Register. When this pin is set to "1", it is used for as the Data Register. | 53 | | R/WB | I | Read/Write ControlInput Pin This pin is used to select either the Write or the Read Operation. Ifthis pin is set to "0", then the Write Function is enabled. If this pin is set to "1", then the Read function is enabled. | 55 | | E | I | Data Read/Write Start Control Pin | 56 | | DBODB3 | I/O | Low Order Bidirectional Data I/O Pins These pins are used for data transfer and reception between the MPU and PT6880. These | 5760 | | | | |
|
