PAL16R8B-2MJ-883B，there are the best PAL16R8B-2MJ-883B suppiers all over the world here.These are the list and detailed contact method of PAL16R8B-2MJ-883B suppliers all over the world as follows.You can buy or get informations of PAL16R8B-2MJ-883B through email , message or tel.

suppliers of PAL16R8B-2MJ-883B and PDF data of PAL16R8B-2MJ-883B

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PAL16R8B-2MJ-883B Datasheet

Notes: 4. CL includes probe and jig capacitance. 5. Allinput pulses are supplied by generators having the following characteristics: PRR < 100 MHz, Zo = 50 1 , tR < 2.5 nS, tF < 2.5 nS 6. The outputs are measured one at a time with one transition per measurement. 7. TPLH and TPHL are the same as tpd.
PAL16R8B-2MJ-883B Price

	ACS	Allegro Current Sensor
	755	Device family number
	S	Operating ambient temperature range code
ACS755	CB	Package type designator
SCB200	200	Maximum measurable current
YYWWA	YY	Manufacturing date code: Calendar year (last two digits)
	WW	Manufacturing date code: Calendar week
		Manufacturing date code: Shift code
	ACS	Allegro Current Sensor
	755	Device family number
ACS755	S	Operating ambient temperature range code
SCB200	CB	Package type designator
SCB200	200	Maximum measurable current
YYWW		Manufacturing lot code
	YY	Manufacturing date code: Calendar year (last two digits)
	WW	Manufacturing date code: Calendar week

PAL16R8B-2MJ-883B on stock

Parameter	Symbol	Condition	Min Typ Max	Units
TEMPERATURE COEFFICIENTl,2 "G" Grade3	TCVo/IC	IOUT=OmA	10	ppm/IC
LINE REGULATION4 "G" Grade	qlVO /CVIN	3.3 V " Vs " 15 V,IOUT = 0 mA	20	ppmN
LOAD REGULATION4 "G" Grade	q:VO/CVLOAD	Vs = 5.0 V, 0 " IOUT " 20 mA	10	ppm/mA
DROPOUT VOLTAGE	Vs - Vo	Vs = 3.8 V) ILOAD = 10 mA Vs = 4.1 V) ILOAD = 20 mA	O80 1.10	V V

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

Suppliers Datasheet
		Exact Matc