| S\,mbol | Characteristic | Value | Units |
| VDSS | Drain-to-Source Voltage | -100 | v |
| | Continuous Drain Current (Tc=250C) | -17 | A |
| ID | Continuous Drain Current (Tc=lOOoC) | -12 |
| IDM | Drain Current-Pulsed O | -68 | A |
| VGS | Gate-to-Source Voltage | +30 | v |
| EAS | Single Pulsed Avalanche Energy O | 578 | mJ |
| IAR | Avalanche Current O | -17 | A |
| EAR | Repetitive Avalanche Energy O | 13.2 | mJ |
| dv/dt | Peak Diode Recovery dv/dt O | -6.5 | V/ns |
| PD | Total Power Dissipation (TA=250C)' | 3.8 | W |
| Total Power Dissipation (Tc=250C) Linear Derating Factor | 132 0.88 | W w/oC |
| TjTSTG | Operating Junction and Storage Temperature Range | - 55 to +175 | oc |
| TL | Maximum Lead Temp. for Soldering Purposes, 1/8" from case for 5-seconds | 300 |
| | | |
Wiper positioning is controlled via a patented dual pushbutton (or contact closure) interface. For simple pushbutton-controlled applications or CPU-generated control signals, external debounce circuitry is not needed. The control interface will support both repetitive pulse inputs and continuous pulse ("push-and- hold") inputs. Repetitive pulse and continuous pulse control as well as timing diagrams are discussed in the section entitled " OPERATION."
