PAL18C10，there are the best PAL18C10 suppiers all over the world here.These are the list and detailed contact method of PAL18C10 suppliers all over the world as follows.You can buy or get informations of PAL18C10 through email , message or tel.

suppliers of PAL18C10 and PDF data of PAL18C10

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PAL18C10 Datasheet

PARK DRIVE Leakage Current	ICEX	VCEX= 20 V	100
PARK DRIVE Saturation Voltage	VCE(SAT)	lc= 200 mA	300 500	mV
PARK Input Threshold	VPARK		0.7 1.1 1.7	V
PARK Input Current	IPARK	VPARK= 1.7 V	100
PARK VOLTAGE Input Current	IPARKV		-150 -500	nA

PAL18C10 Price

Ap plic a tio n info rm a tio n: The inherent resolution ofa PSD is very good. It is proven to be better than one part in one million. The per- formance ofa P SD based measurement system is thuslimited by its mechanical, optical and electrical components.
PAL18C10 on stock

Output Data Format The LTC2410 serialoutput data stream is 32 bits long. The first 3 bits represent status information indicating the sign and conversion state. The next 24 bits are the conversion result, MSB first. The remaining 5 bits are sub LSBs beyond the 24-bit level that may be included in averaging or discarded without loss of resolution. The third and fou rth bit together are also used to indicate an underrange condition (the differentialinput voltage is below-FS) oran overrange condition (the differentialinputvoltage is above Bit 31 (first output bit) is the end of conversion (EOC) indicator. This bit is available at the SDO_pin during the conversion and sleep states wheneverthe CS pin is LOW.

ORDERING NNFORMATION

110E 1 A 48 F 204P P MODEL BUSHING SINGLE SHAFT FMS 2-4 - BIT GREY CODED IN 64ths CODE OPTIONS 110E 1 = @ 9'0 clock A = 3/8 (9.53mm) 48 = 0.750" S: Slotted 204P = 4 cycles/rev B: PC terminals straight 0 = None dia x l/4 (6.35mm) long 56 = 0.875" F: Flatted 1 6 detents/rev (horizontal mount) G = 3/8 (9.53mm) 206P = 6 cycles/rev C: PC terminals bent back dia x 3/8 (6.35mm) long 24 dentents/rev (vertical mount) 209P = 9 cycles/rev Type C - 30 36 dentents/rev P: Type B with mounting bracket 416P = 16 electrical D:Type C with positions/rev mounting bracket 16 dentents/rev S: Solder Hook Example: 110E - 1 - A - 48 - F - 204P - P Hardware not included

Suppliers Datasheet
		Exact Matc