| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
PAL18C1ANC Price (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. PAL18C1ANC on stock MECHANICAL CHARACTERISTICS CASE: Hermetically sealed glass case. D0-41. FINISH: All externaI surfaces are corrosion resistant and leads sol- derable. THERMAL RESISTANCE: Less than lOOoC/ Watt junction t lead at 0.375-inches from body. POLARITY: Banded end is cathode. WEIGHT: 0.378 grams (Typical). -- For Custom Stripmaster~ and Custom Steel SlripmasteW~ Wire Stnpper N N Surface Type Gripper Set Movable Gripper Stationary Gripper [Thickness} -- Grit' LB-197 L-5212 L-5215(129") Grit' LB-198t L-5212 L-5217(156") File LB-721 LB-718 LB-719(129") File LB-7221: LB-718 LB-720(156") Parallel LB-730 LB-727 LB-728(129") Parallel LB-731 LB-727 LB-729(156") - -N For Custom Stnpmaster@ Lite Wire StnppErs N -N Surface Type Gripper Set Movable Gripper Stationary Gnpper [Thickness] -- Gri[ LB-1188 LB-882 LB-883(109") File LB-1189 LB-1184 LB-1185(109") Parallel LB-1190 LB-1186 LB-1187(109") 'Grit pads are standard for all products tFormerly L-7954 tFormerly L-8928 These are for use on hard-to-grip surfaces such as Kapton" and Teflon++ Gripper pad selection depends on insulation type and user preterence Note For wire gauge IU-IH, use 129" stationary gr)pper For 16-30 AWG, use 156" gripper 'Teflon and Kapton are Registered Trademarks of DuPont |
