| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
PAL18L10V Datasheet TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express orimplied, is granted underany patent right, copyright, maskwork right, orother intellectual property right of TI covering or relating to any combination, machine, or process in which such products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, license, warranty or endorsement thereof. PAL18L10V Price 1. RadIation outsIde the sensitIvity ranga of the devlca may be present during these measurements. SufficIent protectlon ha*bean provlded when the parameter being measured cannot be altered by furlher Irradiation shielding. 2. Other ranges of light current can be specified; call Sanlsys for applications assistance. 3. Either R-220 0r R-225; both devices are available in each sensitivity range. 'd'is the distanca to a Kodak neutral test card (90X, diffuse reflectance); tor all testing, d = 0.150' (3.8mm). 4. Croastalk is the measure of radIation transferred through the houslng materIal. d = oo Implies no reflective surfaca and the abssnw of spurious external radiation paths. overflowed (hence showing that the device is now starting the internal write to the memory array). Ready/B~sy pin. The RB pin is an open drain output that is held low during the erase/write cycle, and that is released (allowed to float) at the completion of the programming cycle. |
