PAL18L4AV，there are the best PAL18L4AV suppiers all over the world here.These are the list and detailed contact method of PAL18L4AV suppliers all over the world as follows.You can buy or get informations of PAL18L4AV through email , message or tel.

suppliers of PAL18L4AV and PDF data of PAL18L4AV

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PAL18L4AV Datasheet

	Characteristic	Test Conditions	Min	Typ.	Max	Unit
Ciss	Input Capacitance	VGS = OV		3700	4440
Coss	Output Capacitance	VDS = 25V		51 0	71 5	pF
Crss	Reverse Transfer Capacitance	f=lMHz		200	300	pF
Qg	Total Gate Charge3	VGS = 10V		1 50	225
Qgs	Gate - Source Charge	VDD = 0.5 VDSS		25	37	nC
Qgd	Gate - Drain(Miller") Charge	ID = ID [Cont.] @ 250C		70	1 05	nC
td(on)	Turn-on Delay Time	VGS = 15V		12	25
tr	Rise Time	VDD = 0.5 VDSS		1 0	20
td(off)	Turn-off Delay Time	ID = ID [Cont.] @ 250C		50	75	ns
tf	Fall Time	RG = 1.61		8	1 5	ns

PAL18L4AV Price

Parameter	70U	300U	U nits	Conditions
IF(AV) Max. average forward current	250	300	A	1800 conduction, half sine wave
@ Case temperature	150	1 30	oC
IFSM Max. peak, one-cycle forward,	6550		A	t= 10ms	No voltage
non-repetitive surge current	6850			t= 8.3ms	reapplied
	5500			t= 10ms	100% VRRM
	5750			t= 8.3ms	reapplied	Sinusoidal half wave,
12t Maximum l2t for fusing	214			t= 10ms	No voltage	Initial Tj = Tj max.
	195		KA2S	t= 8.3ms	reapplied
	151			t= 10ms	100% VRRM
	138			t= 8.3ms	reapplied
12d Maximum l2 for fusing	2140		KA2	t = 0.1 t0 10ms, no voltage reapplied
VF(TO) Max. value of threshold " voltage	0.610		V	T=2000C
rf Max. value of forward slope resistance	0.751		ml
VFM Max. peak forward voltage	1.30		V	(IFM X # X IF(AV) (785A peak), Tj = 250C
		1.40	V	(IFM X # X IF(AV) (942A peak), Tj = 250C

PAL18L4AV on stock

Measuring conditions: Unless otherwise specified, connect CE to VOUT, VIN=VOUT X 0.6, IOUT=50mA. See Typical Application Circuits, Fig.2. Note: 1. The Schottky diode (SD) must be type MA735, with reverse current (IR)<1.OUA at reverse voltage (VR)=10.OV 2. 'Supply Current l" is the supply current while the oscillator is continuously oscillating. In actual operation the oscillator periodically operates which results in less average power consumption. The current actually provided by an external VIN source is represented by 'No-Load Input Current (IIN)".

I Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

Suppliers Datasheet
		Exact Matc