PAL18L4M，there are the best PAL18L4M suppiers all over the world here.These are the list and detailed contact method of PAL18L4M suppliers all over the world as follows.You can buy or get informations of PAL18L4M through email , message or tel.

suppliers of PAL18L4M and PDF data of PAL18L4M

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PAL18L4M Datasheet

RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described product(s).
PAL18L4M Price

Symbol	Parameter	Conditions	Max	Units
IF(AV,	Mean forward current	Half wave resistive load, Tra p = 650C ' case	205	A
IF(RMS,	RMS value	T = 650C	236	A

PAL18L4M on stock

Pin No.

Pin Name

Applied Voltage (v)

Pin Voltage (v)

Function and Explanation

Equivalent Circuit

IFinput

1.2

This pin is the IF input pin to the double balanced mixer (DBM). The input is designed as a high impedance. The circuit helps suppress spurious signals. Also this symmetrical circuit can keep

specified performance insensitive to process-

condition distribution. For that reason, a double balanced mixer is adopted.

2 4

GND

GND pin. Ground pattern on the board should be formed as wide as possible. Track length should

be kept as short as possible to minimize ground inductance.

LOinput

2.1

Local input pin. Recommended input level is -10 t0 0 dBm.

Vcc

2.7 t0 3.3

Supply voltage pin.

RFoutput

Same bias as Vcc through external inductor

This pin is the RF output from the double balanced mixer. This pin is designed as an open collector. Due to the high impedance output, this pin should be externally equipped with an LC matching circuit to the next stage.




=l(	)0 r	iA
>	.1(	)m
	3	rnA

Suppliers Datasheet
		Exact Matc