(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other- wise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
PAL18P10NC Price| Dim | Millimeter Min. Max. | Inches Min. Max. |
| B | 31.50 31.88 7.80 8.20 | 1 240 1.255 0 307 0.323 |
| D | 4.09 4.29 4.09 4.29 | 0.161 0.169 0 161 0.169 |
| F | 4.09 4.29 14.91 15.11 | 0 161 0.169 0 587 0.595 |
| H | 30.12 30.30 37.80 38.20 | 1.186 1.193 1 489 1.505 |
| K | 11.68 12.22 8.92 9.60 | 0.460 0.481 0.351 0.378 |
| M | 0.76 0.84 12.60 12.85 | 0 030 0.033 0 496 0.506 |
| 0 | 25.15 25.42 1.98 2.13 | 0 990 1.001 0 078 0.084 |
| 0 | 4.95 5.97 26.54 26.90 | 0 195 0.235 1.045 1.059 |
| S | 3.94 4.42 4.72 4.85 | 0 155 0.174 0 186 0.191 |
| U | 24.59 25.07 -0 05 0.1 | 0.968 0.987 -0.002 0.004 |
| W | 3.30 4.57 0.780 0.830 | 0.130 0.180 19.81 21.08 |
| | |
PAL18P10NC on stock| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | r- | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | J | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | j | | | | | | | | | | | | | | |
| | | | | _ | | | | | | | | | | Legend |
| | | | | | | | | | | | | | | -l- P028V |
| | | | | | | | | | | | | | | | | | |
| Parameter | Symbol | Min | Typ | Max | Unit | Condition |
| Supply Voltage: Positive | VDD | 2.25 | | 2.75 | V | |
| Supply Voltage: Negative | Vss | -2.75 | | -2.25 | V | |
| Supply Current: Positive | IDD | | 5 | 6 | mA | |
| Supply Current: Negative | lss | | 5 | 6 | mA | |
| Current Sensor Inputs (Differential) |
| Input Current Range | l ii | -25 | | +25 | IJA | Peak value |
| Voltage Sensor Input (Asymetrical) |
| Input Current Range | IIV | -25 | | +25 | pA | Peak value |
| Pin SOUT Output Low Voltage Output High Voltage | VOL VOH | VDD-1 | | Vss+l | V V | IOL = 5mA IOH = -2mA |
| Pin SIN High Voltage Low Voltage Pull-up Current | VIH VIL -1l | VDD-1 50 | | Vss+l 1 50 | V V pA | VIN 2 VSS |
| Oscillator | Recommended crystal: TV colour burst crystal f = 3.5795 MHz |
| Pin VREF Ref. Current Ref. Voltage | lR VR | 45 1.1 | 50 | 55 1.3 | pA V | With R = 24kl connected to Vss Referred to Vss |
| | | | | | |
