PAL20C8NM Datasheet| Pin | Symbol | Type | unction | | 1 | GND | Supply | Ground; all ground pins are directly connected to the lead frame | | 2 | OUT2 | Open-collector output | Protected output of driver 2 (faced to: outside) | | 3 | IN 2 | Digital input | Input of protected driver 2 (faced to: pP) | | 4 | DIS | Digital input | Disable input for OUT 2 and OUT 3, "H"=enable, "L"=disable | | 5 | VCC | Supply | +5-V supply | | 6 | IN 3 | Digital input | Input of protected driver 3 (faced to: pP) | | 7 | OUT3 | Open-collector output | Protected output of driver 3 (faced to: outside) | | 8 | GND | Supply | Ground | | 9 | GND | Supply | Ground | | 10 | OUT1 | Open-collector output | Protected output of driver l (faced to: outside) | | 1 1 | IN 1 | Digital input | Input of protected driver l (faced to: pP) | | 12 | VS | Supply/reference | +12-V reference for K-Iine level | | 13 | RXD | Digital output | Diagnosis receive line (faced to: pP) | | 14 | TXD | Digital input | Diagnosis transmit line (faced to: pP) | | 15 | K | 12-V input and O.C. output | Bi-directional diagnosis line (faced to: outside) | | 16 | GND | Supply | Ground | | | | |
PAL20C8NM Price +5V Bias Supplies The SC1485 requires an external +5V bias supply in ad- dition to the battery. If stand-alone capability is required, the +5V supply can be generated with an external linear regulator such as the Semtech LP2951A. To minimize channel to channel crosstalk, each controller has 4 sup- ply pins, VDDP, PGND, VCCA and AGND. PAL20C8NM on stock| TYPE NUMBER | Breakdown Voltage @ | Reverse Stand-off Voltage | Maximum Reverse Leakage @ VRWM | Maximum Clamping Voltage @ IRSM=5A | Maximum Reverse Current | Maximum Junction Capacitance @ o Volt | Working Inverse Blocking Voltage | Max. Inverse Blocking Current @ VWIB | Peak Inverse Blocking Voltage | | VBR (V) lt | VRWM | IR | VRSM | IRSM | VWIB | IIB | VPIB | | Min. (mA) | (V) | (VA) | (V) | (A) | pF | (V) | mA | (V) | | | | | | | | | | |
| | ltem | Symbol | Condif ions | Min | Typ | Max | Unit | | | J Forward voltage | VF | I F=60mA | | 1 3 | 1 6 | V | | Input | Reverse current | IR | VR=5V | | | 1 0 | uA | | A8 | Operating SUOPIY voltageange | Vcc | | 4.5 | 5 0 | 5 5 | V | | | -LJbLow level output voltage | VOL | Vcc=5V, IOL=500 U A | | 0 1 | 0 4 | V | | Output | LJbHigh level output voltage | VOH | Vcc=5V, IF=30mA | 4 | | | V | | | -r-Duty ratio | DA | Vcc=5V, IF=30mA | 25 | 50 | 75 | | | | DB | Vcc=5V, IF=30mA | 25 | 50 | 75 | % | | Transmission | Phase difference{3 | eie4 | Vcc=5V, IF=30mA | 45 | 90 | 1 35 | | | Response FreauenCY | fmax | Vcc=5V, IF=30mA | | | 20 | KHz | | | | | | | | |
|
