PAL20P2AJC，there are the best PAL20P2AJC suppiers all over the world here.These are the list and detailed contact method of PAL20P2AJC suppliers all over the world as follows.You can buy or get informations of PAL20P2AJC through email , message or tel.

suppliers of PAL20P2AJC and PDF data of PAL20P2AJC

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

PAL20P2AJC Datasheet

CONFIGURATION

STATUS

REAL TIME CLOCK

ELAPSE TIMER

CYCLE COUNTER

RTC ALARM

ELAPSE ALARM

CYCLE ALARM

PAL20P2AJC Price

			Limits
S\imb	Parameter		Min	TYp	Max	Unit
IRRM	Repetitive peak reverse current	VF~=VRRM, Ti=150YC			5 0	mA
VFM	Forward voltage	IF=30A			1 5	V
trr	Reverse recover,/ time				0 9
Qrr	Reverse recover,/ charge	IF=30A, di/dt=-60A/ s, VR=600V, Ti=1 50IC			1 5
Rth lj-cl					1 3	YC
Rth lc-f)	Contact thermal resistance	Conductive grease applied (case to fin)			0 1 5	YC/W

PAL20P2AJC on stock

1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.

At lowload currents,theinductor current can dropto zero and become negative. This is detected by current reversal comparator IREV which then shuts off M2, resulting in discontinuous operation. Both switches will remain off with the output capacitor supplying the load current until the ITH voltage rises above the zero current level (0.8V) to initiate another cycle. Discontinuous mode operation is disabled by comparator F when the FCB pin is brought below 0.8V, forcing continuous synchronous operation.

Suppliers Datasheet
		Exact Matc