| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
PAL20R4JM Datasheet I Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. PAL20R4JM Price Write operations are initiated when both Chip Select(s) and Write Enable(s) are LOW and Output Enable is HIGH. The PUMA2E1000 supports both a Chip Select(s) and Write Enable(s) controlled write cycle. Thatis, the address is latched by the falling edge of either Chip Select(s) or Write Enable(s),whichever occu rs last. Similarly, the data is latched internally by the rising edge of either Chip Select(s) or Write Enable(s), whichever occurs first. A byte/ word write operation, once initiated, will automatically continue to completion, within 10 ms max. PAL20R4JM on stock The input of the device will withstand input voltages of -7V. Current flow into the device will be limited to less than 500 (typically less than 200) and only a small negative voltage will appear at the output(-300mV with no load).The LTC1844 will protect both itself and theload against batteries plugged in backward.
|
