suppliers of PALCE20V8H-7JC5PROG and PDF data of PALCE20V8H-7JC5PROG

PALCE20V8H-7JC5PROG，there are the best PALCE20V8H-7JC5PROG suppiers all over the world here.These are the list and detailed contact method of PALCE20V8H-7JC5PROG suppliers all over the world as follows.You can buy or get informations of PALCE20V8H-7JC5PROG through email , message or tel.

iRESHOR IATCHIFF'HIRE' I

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
PALCE20V8H-7JC5PROG	ADVANCED MIC		N/A	original	695	EAST WIN TECHNOLOGY(HK)ELECTRO.. Contact:Philip chen Tel:852-27592923/0755-83226762/88820516 Fax:852-27592926/0755-82518619 Email: philip.chen@eastwinelec.com

PALCE20V8H-7JC5PROG Datasheet

Port E is an 8-bit bi-directional l/0 port with internal pull-up resistors (selected for each bit). The Port E output buffers have symmetrical drive characteristics with both high sink and source capability. As inputs, Port E pins that are externally pulled low will source current if the pull-up resistors are activated. The Port E pins are tri-stated when a reset condition becomes active, even if the clock is not running.
PALCE20V8H-7JC5PROG Price

PALCE20V8H-7JC5PROG on stock

Drain to source breakdown	V(BR}DSS	6			V	ID = 200, VGIS = VG2S = 0
voltage	V(BR}DSS	6			V	ID = 200, VGIS = VG2S = 0
Gatel to source breakdown	V(BR}GISS	+6			V	IGl = +10 VG2S = VDS = 0
voltage	V(BR}GISS	+6			V	IGl = +10 VG2S = VDS = 0
Gate2 to source breakdown	V(BR}G2SS	+6			V	IG2 = +10cCA, VGIS = VDS = 0
voltage	V(BR}G2SS	+6			V	IG2 = +10cCA, VGIS = VDS = 0
Gatel to source cutoff current	IGISS			+100	nA	VGIS = +5V, VG2S = VDS = 0
Gate2 to source cutoff current	IG2SS			+100	nA	VC2S = +5V, VGIS = VOS = 0
Gatel to source cutoff voltage	VGIS(off,	0.6	0.85	1.1	V	VDS = 5V, VG2S = 4V, ID = 100ccA
Gate2 to source cutoff voltage	VG2S(off,	0.6	0.85	1.1	V	VDS = 5V, VCIS = 5V, ID = 100ccA
Drain current	I D(op)	13	16	19	mA	VDS = 5V, VCl = 5V VC2S = 4V, Re = 120kl
Forward transfer admittance	IYfsl	24	29	34	mS	VDS = 5V, VCl = 5V, VC2S =4V Re = 120kl ,f = 1kHz
Input capacitance	ciss	1.7	2.1	2.5	pF	VDS = 5V, VCl = 5V
Output capacitance	coss	1.0	1.4	1.8	pF	VC2S =4V, Re = 120kl
Reverse transfer capacitance	C rss		0.027	0.05	pF	f= 1MHz
Power gain (1)	PG	25	30		dB	VDS = 5V, VCl = 5V VC2S =4V, Re = 120kl
Noise figure (1)	NF		1.0	1.8	dB	f= 200MHz
Power gain (2)	PG	17	22		dB	VDS = 5V, VCl = 5V VC2S =4V, Re = 120kl
Noise figure (2)	NF		1.75	2.3	dB	f= 900MHz

MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION . 725 E. Walnut St., Garland, TX 75040 . (972) 272-3571 . Fax (972) 487-6918 . ' - E-MAIL: optosales@micropac.com 7-6

Suppliers Datasheet
		Exact Matc