Q62704-Y12-B，there are the best Q62704-Y12-B suppiers all over the world here.These are the list and detailed contact method of Q62704-Y12-B suppliers all over the world as follows.You can buy or get informations of Q62704-Y12-B through email , message or tel.

suppliers of Q62704-Y12-B and PDF data of Q62704-Y12-B

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

Q62704-Y12-B Datasheet

Complete CODEC and FILTER systemincluding: I PCM ANALOG TO DIGITAL AND DIGITAL TO ANALOG CONVERTERS I POWERFUL ANALOG FRONT END CAPA- BLE TOINTERFACE DIRECTLY: - Microphone Dynamic or Electrete - Earpiece down to iool oir up t0 150nF - Loudspeakerdown to sol or Buzzer up to 600nF.
Q62704-Y12-B Price

Thermal Resistance - No Heat Sink Rthja 400 0C/W TemperatureCoefFicient-OpticalPower dP/dTj -0.4 %/oC

Temperature CoefFicient -Whvelength dA/dTj 0.3 nm/oC

America: Tell-800-96MITELelFax6(613)8592-69090 Fax (46) 8 58 02 01 10 Asia: Tel (65) 293 5312 Fax (65) 293 8527 Tel (44) 1291 436180 Fax (44) 1291 436771

Q62704-Y12-B on stock

The A3046EU/LU, A3056EU/LU, and A3058EU/LU Hall effect gear-tooth sensors are monolithic integrated circuits that switch in response to differential magnetic fields created by ferrous targets. These devices are ideal for use in gear-tooth-based speed, position and timing applications and operate down to zero rpm over a wide range of air gaps and temperatures. When combined with a back- biasing magnet and proper assembly techniques, devices can be configured to give 50% duty cycle or to switch on either leading, trailing, or both edges of a passing gear tooth or slot.

SYMBOL	PARAMETER	CONDITIONS	MIN	TYP.	MAX	UNIT
Per transistor
ICBO	collector cut-off current	IE = 0; VCB = 50 V			100	nA
ICEO	collector cut-off current	lB = 0; VCE = 30 V			1
ICEO	collector cut-off current	lB = 0; VCE = 30 V; Ti = 150 IC ' J			50
IEBO	emitter cut-off current	lc = 0; VEB = 5V			400
hFE	DC current gain	lc = 5 mA; VCE = 5V	30
VCEsat	collector-emitter saturation voltage	lc = 10 mA; lB = 0.5 mA			150	mV
Vi(off)	input-off voltage	lc = 100 VCE = 5 V		1.1	0.8	V
Vi(on)	input-on voltage	lc = 10 frlA; VCE = 0.3 V	2.5	1.8		V
R1	input resistor		7	10	13	k l
R2 R1	resistor ratio		0.8	1	1.2
Ce	collector capacitance	IE = ie = 0; VCB = 10 V; f= 1 MHz			2.5	pF

Suppliers Datasheet
		Exact Matc