Q67233H1434，there are the best Q67233H1434 suppiers all over the world here.These are the list and detailed contact method of Q67233H1434 suppliers all over the world as follows.You can buy or get informations of Q67233H1434 through email , message or tel.

suppliers of Q67233H1434 and PDF data of Q67233H1434

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

Q67233H1434 Datasheet

NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M,1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A AND B DO NOTINCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOTINCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. 751-01 THRU 751-06 ARE OBSOLETE. NEW STANDARDIS 751-07.
Q67233H1434 Price

Symbol	Parameter	Conditions	Min	Max	U nits
VRGM	Peak reverse gate voltage	This value maybe exceeded during turn-off		1 6	V
IFGM	Peak forward gate current		20	1 00	A
PFG(AV,	Average forward gate power			20	W
PRGM	Peak reverse gate power			24	kW
diGQdt	Rate of rise of reverse gate current		20	60	A/~s
tON(min,	Minimum permissable on time		50		c(s
tOFF(min,	Minimum permissable off time		1 00		c(S

Q67233H1434 on stock

Notes: 16. The clocks (RCLK, WCLK) can be free-running during reset. _ 1 7. After reset, the outputs will be LOW if OE = 0 and three-state if OE = 1. 18. When tSKEW2 > minimum specification, tFRL (rTiaxirTiUrTl) = tCLK + tSKEW2 Wheri tSKEW2 < rTiiriicTIUrTi specificatiori, tFRL (maximum) = either 2*tCLK + tSKEW2 or tCLK + tSKEW2 The Latency Timing applies only at the Empty Boundary (EF = LOW). 19. The first word is always available the cycle after EF goes HIGH.

Symbol	Parameter	Min	Typical (Note 4)	Max	Units	Test Conditions
ILI	Input leakage Current (Port 0)			±10	uA	VIN = VIL or VIH
ITL	Logical l to O Transition Current (Ports l, 2 and 3) Express Commercial			- 750 - 650	uA	VIN=2V
RRST	RST Pulldown Resistor	40		225	Kfl
CIO	Pin Capacitance		10		pF	@1MHz, 250C
lcc	Power Supply Current: Active Mode At 12 MHz (Figure 5) At 16 MHz At 24 MHz At 33 MHz ldle Mode At 12 MHz (Figure 5) At 16 MHz At 24 MHz At 33 MHz Power Down Mode		15 20 28 35 5 6 7 7 5	30 38 56 56 7.5 9.5 13.5 15 75	mA mA mA mA mA mA mA mA	(Note 31

Suppliers Datasheet
		Exact Matc