| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| Q7993 | ERICSSON, | 01+, | 275, |
|
![]() |
||
| Q7993 | ERICSSON | QFP64 | 07+ | 275 |
|
![]() |
|
| Q7993 | ERICSSON | QFP64 | 05+ | 原装现货,品质为先! | 2200 |
|
|
| Q7993 | new and or | 08+ | 1000 |
|
|||
| Q7993 | ERICSSON | QFP64 | 275 |
|
![]()
|
||
| Q7993 | ERI | QFP64 | 1 | 275 |
|
||
| Q7993 | ERICSSON | QFP64 | 01+ | 270 |
|
||
| Q7993 | ERICSSON | QFP64 | 01+ | 275 |
|
||
| Q7993 | ERICSSON | QFP64 | 01+ | new and original | 444 |
|
![]()
|
| Q7993 | ERICSSON | QFP64 | 01+ | delivered in 2-7 da | 15000 |
|
|
| Q7993 | ERICSSON | QFP64 | 01+ | 365 |
|
||
| Q7993 | ERICSSON | 275 |
|
||||
| Q7993 | ERICSSON | QFP64 | 01+ | 275 |
|
||
| Q7993 | QFP64 | ERICSSON | 01+ | 275 |
|
![]() |
|
| Q7993 | 275 | 本公司特价库存 | 01+ | ERICSSON |
|
||
| Q7993 | ERICSSON | QFP64 | 01+ | NEW AND ORIIGINAL ST | 275 |
|
|
| Q7993 | SIEMENS | QFP64 | 07+ | 15000 |
|
||
| Q7993 | ERICSSON | QFP64 | 07+ | STOCK | 495 |
|
|
| Q7993 | 275 | ERICSSON | 01+ | QFP64 |
|
||
| Q7993 | 275 |
|
|||||
| Q7993 | QFP64 | 01+ | ERICSSON | 275 |
|
||
| Q7993 | ERICSSON | 275 |
|
||||
| Q7993 | ERICSSON | QFP64 | 01+ | http://www.silicon-i | 275 |
|
|
| Q7993 | ERICSSON | QFP64 | 01+ | New&Original/stock | 275 |
|
|
| Q7993 | ERICSSON | QFP64 | 01+ | NEWANDORIIGINALSTOCK | 275 |
|
|
Q7993 Datasheet REF+ (Pin 2), REF- (Pin 3): Differential Reference Input. The voltage on these pins can have any value between GND and Vcc as long as the reference positive input, REF+, is maintained more positive than the reference negative input, REF-, by at least O.lV. Q7993 Price
Q7993 on stock I Cooling method: by condiction (C) I Recommended torque value: 1.3 N.m (MAX l.5 N.m) for the 6 x M4 screws. (2 x M4 screws recommended for mounting the package on the heatsink and the 4 screws for terminals). I The screws supplied with the package are suitable for mounting on a board (or other types of terminals) with a thickness of 0.6 mm min and 2.2 mm max. There are tw0 128 byte banks of internal direct memory in the 80C32. The system uses the lower 128 bytes under normal conditions. Switching to the upper bank is achieved by loading register 8FH.1 (SFR of the 80C32) with l. Switching to the lower bank can be achieved by loading the same register with 0. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||