QHO-12.0000MHZ，there are the best QHO-12.0000MHZ suppiers all over the world here.These are the list and detailed contact method of QHO-12.0000MHZ suppliers all over the world as follows.You can buy or get informations of QHO-12.0000MHZ through email , message or tel.

suppliers of QHO-12.0000MHZ and PDF data of QHO-12.0000MHZ

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

QHO-12.0000MHZ Datasheet

Characteristic Symbol Min Typ Max Unit

Reverse Breakdown Voltage (l R = 10) V(BR)R 30 Volts

Total Capacitance (V R = 1.0 V, f = 1.0 MHz) CT 7.6 10 pF

Reverse Leakage (V R= 25 V) IR - 0.5 2.0 D:Adc

Forward Voltage (IF= 0.1 mAdc) VF - 0.22 0.24 Vdc

Forward Voltage (IF= 30 mAdc) VF - 0.41 0.5 Vdc

Forward Voltage (l F= 100 mAdc) VF - 0.52 0.8 Vdc

Reverse Recovery Time tr, 5.0 ns (l F = I R = 10 rfiAdc, I R(REC) = 1.0 mAdc, Figure l)

Forward Voltage (IF= 1.0 mAdc) VF - 0.29 0.32 Vdc

Forward Voltage (l F= 10 mAdc) VF - 0.35 0.40 Vdc

Forward Current (DC) IF 200 mAdc

Repetitive Peak Forward Current IFRM - 300 mAdc

Non-Repetitive Peak Forward Current (t < 1.0 s) IFSM 600 mAdc

QHO-12.0000MHZ Price

.MODEL DBODYMOD D (IS = 2.4e-11 N = 1.04 RS = 1.76e-3 TRSl = 2.7e-3 TRS2 = 2e-7 XTl=3.9 CJO = 4.35e-9 TT = 1e-8 M = 5.4e-1) .MODEL DBREAKMOD D (RS = 1.5e-1 TRSl = 1e-3 TRS2 = -8.9e-6) .MODEL DPLCAPMOD D (CJO = 1.35e-9 IS =1e-30 N = 10 M = 0.53) .MODEL MMEDMOD NMOS (VTO = 3.7 KP = 9 IS =1e-30 N = 10 TOX =1 L =1u W = 1u RG = 1.36) .MODEL MSTROMOD NMOS (VTO = 4.4 KP = 250 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u) .MODEL MWEAKMOD NMOS (VTO = 3.05 KP = 0.03 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 1.36e1 RS = 0.1) .MODEL RBREAKMOD RES (TCl = 1.05e-3 TC2 = -9e-7) .MODEL RDRAINMOD RES (TCl = 1.9e-2 TC2 = 4e-5) .MODEL RSLCMOD RES (TCl = 1.3e-3 TC2 = 1e-5) .MODEL RSOURCEMOD RES (TCl = 1e-3 TC2 = 1e-6) .MODEL RVTHRESMOD RES (TCl = -6e-3 TC2 = -1.9e-5) .MODEL RVTEMPMOD RES (TCl = -2.4e-3 TC2 = 1e-6)
QHO-12.0000MHZ on stock

N OTES J: Hysteresis is temporary instability in anode current after light and voltage A:The light source is a tungsten filament lamp operated at a distribution tem- are applied.

Table l-1 identifIes the characteristics of capacitors from a number of vendors with acceptable ESR and ripple current (rms) ratings. The suggested minimum quantities per regulator for both the input and output buses are identified Tbis is not an extensive capacitor list. Capacitors from otber vendors are available witb comparible specifications. The RMS ripple current rating and ESR (Equivalent Series Resistance at 100kHz) are the critical pararFieters necessary to insure botb optimum regulator performa7ice ctnd long capacitor life.

Suppliers Datasheet
		Exact Matc