1 Continuous input voltage. The specified pulse width is for the drain current. 2 Refer to OVERLOAD PROTECTION LIMITING VALUES. 3 Continuous drain-source supply voltage. Pulsed input voltage. 4 Continuous input voltage. Momentary short circuit load connection. (The higher peak current is due to the effect of capacitance Cgd). 5 The over temperature protection feature requires a minimum on-state drain source voltage for correct operation. The specified minimum ID ensures this condition.
R3111Q271A-TL on stock| Parameter | Symbol | Conditions | Ratings | Unit |
| Collector to base voltage | VCBO | | -60 | v |
| Collector to emitter voltage | VCEO | | -60 | V |
| Emitter to base voltage | VEBO | | -6O | V |
| Collector current (DC) | IC(DC) | | -5O | A |
| Collector current (pulse) | IC(pulse) | PW ilo ms, duty cycle 1 50 % | -7O | A |
| Base current (DC) | IB(DC) | | -1O | A |
| Total power dissipation | PT | 7.5 cm2 x 0.7 mm ceramic board used | 2O | W |
| Junction temperature | Tj | | 150 | oC |
| Storage temperature | Tstg | | -55 to +150 | oC |
| | | | |
