RNRC6U8K160V Datasheet| Expansion Bus | | C_3, C_2 | B/F | TS/F | F/MF | | 00 | 193 | 24 | 12 | | 01 | 256 | 32 | 16 | | 10 | 512 | 64 | 16 | | 11 | 1024 | 128 | 16 | | | | | RNRC6U8K160V Price| | | | | | | | | j LL | ICBO | VCB = 10V.IE = 0 | | | 100 | nA | | IyL | IEBO | VEB = 2V,Ic = 0 | | | 1 | LiA | | | hFE | VCE = 10V,IC = lOmA | 40 | | | | | | hFE81 | VCE = 10V,IC = lOmA | 0.5 | 0 99 | | | | hyj | fr | VCE = 10V,IC = lOmA, f = 200MHz | | 4.5 | | GHz | | j L | Cob | VCB = 10V,IE = 0, f = 1MHz | | | 1 2 | pF | | | l S21e l2 | VCE = 10V,IC = 20mA, f = 0.8GHz | | 12 | | dB | | | GUM | VCE = 10V,IC = 20mA, f = 0.8GHz | | 14 | | dB | | | NF | VCE = 10V,IC = 5mA, f = 0.8GHz | | 1.3 | | dB | | | | | | | | RNRC6U8K160V on stock 3) When there is a count in progress, writing a new LSB before the counter has counted down to O and rolled over to FFFFh, WILL stop the counter. However, if the LSB is loaded AFTER the counter has rolled over to FFFFh, so that an MSB now exists in the counter, then the counter WILL NOT stop. | Parameter | Symbol | Min | Typ. | Max. | Unit | Conditions | | Quiescent current dissipation | lcc | | 7.0 | 10O | mA | No load | | Standby current dissipation | lscc | | 0 | 100 | A | No load | | Output voltage, offset | Voo | -50 | | 50 | mV | | | Maximum output amplitude | VOM | 2.5 | 3O | | V | | | Closed loop voltage gain | Gvc | 10.5 | 12.0 | 13.5 | dB | VIN-±0.3V | | Ripple rejection | RR | | 60 | | dB | RIPPLE IN=O.lVrms, 100Hz | | Slew rate | SR | | 2O | | V/ILs | 100 kHz square wave, 2 VP-P output | | Mute On voltage | VMON | | | O5 | V | | | Mute Off voltage | VMOFF | 2O | | | V | | | Standby On voltage | VSON | | | O5 | V | | | Standby Off voltage | VSOFF | 2O | | | V | | | | | | | | | |