RNSIL8A47K Datasheet| Symbol | Parameter | Test Conditions | Min | Typ. | Max | Unit | | td(on) tr td (off) tf | Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time | VDD = 15 V Id = 5 A Vgen = 10 V Rgen = 10 (see figure 3) | | 50 80 230 100 | 100 160 400 180 | ns ns ns ns | | td(on) tr td (off) tf | Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time | VDD = 15 V Id = 5 A Vgen = 10 V Rgen = 1000 (see figure 3) | | 600 0.9 3.8 1.7 | 900 2 6 2.5 | ns ccS ccS | | (di/dt)on | Turn-on Current Slope | VDD = 15 V ID = 5A Vin = 10 V Rgen = 10 | | 60 | | A/ccS | | Qi | Total Input Charge | VDD = 12 V ID = 5A Vin = 10 V | | 30 | | nC | | | | | | | |
RNSIL8A47K Price The DS1804 is specified to accept 50,000 writes to EEPROM before a wear-out condition. After wear-out the DS1804 will still function and wiper position can be changed during powered conditions using the three-terminal control port. However, on power-up the wiper-position will be indeterminate. RNSIL8A47K on stock| PARAMETER | SYMBOL | CONDITIONS | MIN TYP MAX | UNITS | | ANALOG INPUTS | | Analog Input Voltage Range, | | Unipolar, VCOM = o | 0 VREF | | | Single Ended and Differential (Note 6) | VlN | Bipolar, VCOM = VREF/2 | -VREF/2 +VREF/2 | V | | Multiplexer Leakage Current | | On-/off-Ieakage current, VIN = 0 0r VDD | ±0 01 ±1 | UA | | Input Capacitance | ClN | | 12 | pF | | INTERNAL REFERENCE | | REF Output Voltage | | | 2 49 2 5 2 51 | V | | REF Short-Circuit Current | | | 15 | mA | | REF Temperature Coefficient | TCREF | TA = Ooc to +700C | ±20 | ppm/oC | | REFADJ Input Range | | For small adjustments | ±100 | mV | | REFADJ High Threshold | | To power down the internal reference | VDD - 1.0 | V | | Load Regulation | | 0 t0 0.5mA output load (Note 7) | 0 2 | mV/mA | | Capacitive Bypass at REFADJ | | | 0 01 1 | uF | | Capacitive Bypass at REF | | | 4 7 10 | uF | | EXTERNAL REFERENCE AT REF | | REF Input Voltage Range | VREF | | VDD+ 1 0 50mV | V | | | | VREF = 2.5V, fSAMPLE = 400ksps | 200 300 | | | Shutdown REF Input Current | IREF | Shutdown mode | 2 | UA | | DIGITAL INPUTS AND OUTPUTS | | | | VLOGIC= 4.5V | 4 0 | | | Input Voltage High | VIH | VLOGIC= 2.7V | 2 0 | V | | Input Voltage Low | VIL | VLOGIC = 4.5V or 2.7V | 0 8 | V | | Input Hysteresis | VHYS | | 200 | mV | | Input Leakage Current | IIN | VIN=0 0r VDD | +0.1 ±1 | UA | | Input Capacitance | ClN | | 15 | pF | | Output Voltage Low | VOL | ISINK= 1.6mA | 0 4 | V | | Output Voltage High | VOH | ISOURCE = 1mA | VLOGIC - 0.5 | V | | Tri-State Leakage Current | ILEAKAGE | CS= VDD | +0.1 ±1 | UA | | Tri-State Output Capacitance | COUT | CS= VDD | 15 | pF | | | | | |
South America: Rua do Roci0 220, 5th floor, Suite 51, 04552-903 Sao Paulo, SAO PAULO - SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 829 1849 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 3 301 6312, Fax. +34 3 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 632 2000, Fax. +46 8 632 2745 Switzerland: Allmendstrasse 140, CH-8027 ZURICH, Tel. +41 1 488 2686, Fax. +41 1 481 7730 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1 TAIPEI, Taiwan Tel. +886 2 2134 2865, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090. Fax. +66 2 398 0793
|
