suppliers of RNX-1-4 47M J M and PDF data of RNX-1-4 47M J M

RNX-1-4 47M J M，there are the best RNX-1-4 47M J M suppiers all over the world here.These are the list and detailed contact method of RNX-1-4 47M J M suppliers all over the world as follows.You can buy or get informations of RNX-1-4 47M J M through email , message or tel.

Single Phase Half Wave 60Hz

_ Resistive or Inductive Load I I

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

RNX-1-4 47M J M Datasheet

If analog inputs are enabled, the corresponding input channels are not scanned for digital signals. The digital input signals for those channels are always set t0 0 without taking care of the analog input level. If analog inputs are disabled (CFGl = 1, CFGO = 1) the analog input voltage of input INO to IN3 is not scanned. Do not apply higher voltages than VCC and AVCC to any input pin. If the ND converter is not used, connect the power supply pins as follows: AVCC = AVREF = VCC. AVSS = VSS.
RNX-1-4 47M J M Price

The PG103001 (Contactless Programmer) is used for the programming of the device. The voltage level shown in Figure 4-1 is adjusted by R5 and R7 in the contactless programmer. Refer to the MicroIDTM 125 kHz RFID System Design Guide (DS51115) for more information.
RNX-1-4 47M J M on stock

Part No.	Max Freq.	Interface	Package
K4S641633H-R(B)E/N/G/C/L/F75	133MHz(CL=3)
K4S641633H-R(B)E/N/G/C/L/FIH	105MHz(CL=2)	LVCMOS	54 FBGA Leaded (Lead Free)
K4S641633H-R(B)E/N/G/C/L/FIL	105MHz(CL=3)'1	LVCMOS	54 FBGA Leaded (Lead Free)

Suppliers Datasheet
		Exact Matc