suppliers of ROP10118-2R1 and PDF data of ROP10118-2R1

ROP10118-2R1，there are the best ROP10118-2R1 suppiers all over the world here.These are the list and detailed contact method of ROP10118-2R1 suppliers all over the world as follows.You can buy or get informations of ROP10118-2R1 through email , message or tel.

Tj = 1500C, RG : 251, VGE = 15V, L = 100"H

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

ROP10118-2R1 Datasheet

Symbol	Parameter	Conditions	Max	Units
Double Side Cooled
IT(AV,	Mean on-state current	Half wave resistive load	2010	A
IT(RMS,	RMS value		3155	A
IT	Continuous (direct) on-state current		2850	A
Single Side Cooled (Anode side)
IT(AV,	Mean on-state current	Half wave resistive load	1310	A
IT(RMS,	RMS value		2050	A
IT	Continuous (direct) on-state current		1740	A

ROP10118-2R1 Price

ROP10118-2R1 on stock

Parameter	Symbol	Ratings	Unit
Gate to Drain voltage	VGDS	65	V
Drain current	ID	-20	mA
Gate current	IG	-10	mA
Allowable power dissipation	PD	300	mW
Channel temperature	Tch	150	oC
Storage temperature	Tstg	-55 to +150	oC

A protection diode between the Output pin and VPOWER pin is not usually needed. Microsecond surge currents of 50A t0 100A can be handled by the internal diode between the Output pin and VPOWER pin of the device. In normal operations, it is difficult to get those values of surge currents even with the use of large output capacitances. Only with high value output capacitors, such as 1000uF t0 5000uF and the VPOWER pin is instantaneously shorted to ground, damage an occur. A diode from output to input is recommended (Figure 6). If CM1582 is connected as single supply device with the control and power input pins shorted together the internal diode between the output and power input pin will protect the control input pin.

Suppliers Datasheet
		Exact Matc