| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| RP03-1215DE | recompower | New origin | 08+ | 500 |
|
|
RP03-1215DE Datasheet RESET (Pins 5/11): System Reset, Active Low. This is an open-drain output. This pin provides a low going reset signal to the system processor. A 200ms pulse is gener- ated ifthe CTL pin is pulled low for more than two seconds ("hard" reset) or if the LTC1559 comes out of UVLO. This "hard reset" stops the internal boost converter if it is running. This pin is held low ifthe LTC1559 is in UVLO and RP03-1215DE Price Collector-Emitter Saturation Voltage VCE(sat) lC = 100A, VGE = 15V, Ti = 25YC - 2.4 3.0 Volts , J RP03-1215DE on stock
The device powers up in the ERASE/WRITE Disable (EWDS) state. All programming modes must be pre- ceded by an Erase/Write Enable (EWEN) instruction. Once the EWEN instruction is executed, programming remains enabled until an EWDS instruction is executed or Vcc is removed from the device. To protect against accidental data disturbance, the EWDS instruction can be used to disable all ERASE/WRITE functions and should follow all programming operations. Execution of a READ instruction is independent of both the EWDS and EWEN instructions. |
