RP03-4805 Datasheet Figure 9 shows how an n-bit full adder can be implemented in n + 1 LEs with the carry chain. One portion ofthe LU T generates the sum oftw o bits using the input signals and the carry-in signal; the sum is routed to the output ofthe LE. The register can be bypassed for simple adders or used for an accumulator function. Another portion ofthe LUT and the carry chain logic generates the carry-out signal, which is routed directly to the carry-m signal ofthe next-higher-order bit. The final carry-out signal is routed to an LE, where it can be used as a general-purpose signal. RP03-4805 Price| SYMBOL | PARAMETER | CONDTIONS | NOTES | PIN- NAME | MIN | MAX | UNT | SUB - GROUPS | | Voh | Logical "l" Output Voltage | Vcc = 4.5V, Ioh = -440uA, Delta Vin = 1V, Ven = 0.8V = Ven | | | -250 | 250 | mV | l | | Vol | Logical J' o J' Output Voltage | Vcc = 4.5V, Iol = 4mA, Delta Vin = -1V, Ven = 0.8V = Ven | | | -45 | 45 | mV | l | | Vcc = 4.5V, Iol = 8mA, Delta Vin = -1V, Ven = 0.8V = Ven | | | -45 | 45 | mV | l | | in | Input Current | Vcc = 4.5V, Vin=15V (Pin under test) , other inputs -15V <= Vin <= +15V | | | -0.28 | 0.28 | mA | l | | Vcc = 5.5V, Vin=-15V (Pin under test) , other inputs -15V <= Vin <= +15V | | | -0.28 | 0.28 | mA | l | | | | | | | | | |
RP03-4805 on stock| RATING | SYM BOL | RBV 1000D | RBV 1001D | RBV 1002D | RBV 1004D | RBV 1006D | RBV 1008D | RBV 1010D | UNIT | | Maximum Recurrent Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts | | Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts | | Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts | | Maximum Average Forward Current Tc = 550C | IF(AV) | 10 | Amps. | | Peak Forward Surge Current Single half sine wave Superimposed on rated load (JEDEC Method) | IFSM | 300 | Amps. | | Current Squared Time at t < 8.3 ms. | 12t | 166 | A2S | | Maximum Forward Voltage per Diode at IF = 10 Amps. | VF | 1.0 | Volts | | Maximum DC Reverse Current Ta = 25 0C | IR | 10 | uA | | at Rated DC Blocking Voltage Ta = 100 0C | IR(H) | 200 | uA | | Typical Thermal Resistance (Note l) | ROJC | 2.2 | oC/w | | Operating Junction Temperature Range | TJ | - 40 to +150 | oC | | Storage Temperature Range | TSTG | - 40 to +150 | oC | | | | | | | | | | |
The followings summarize locking status. example) In default, [2:0] values are 010. -> If host executes unlock block operation, then [2:0] values turn t0 100. -> If host executes lock-tight block operation, then [2:0] values turn t0 001
|
