RP10-2412SEW Datasheet| CHARACTERISTIC | SYMBOL | TEST CONDITION | MIN | TYP | MAX | UNIT | | Gate Leakage Current | IGES | VGE = 6 V, VCE = 0 | | | 10 | uA | | Collector Cut-off Current | ICES | VCE = 400 V, VGE = O | | | 10 | pA | | Gate-Emitter Cut-off Voltage | VGE( OFF) | IC = 1mA, VCE = 5V | O8 | | 1.5 | V | | Collector-Emitter Saturation Voltage | V CE (sat) | IC = 150 A, VGE = 4V (Pulsed) | | 3.5 | 7 | V | | Input Capacitance | Cies | VCE = 10 V, VGE = 0, f = 1MHz | | 3800 | | pF | | | Rise Time | tr | 4~_1-L 051l | | 2.3 | | | | Switching | Turn-on Time | ton | VIN : tr 100 nsC- | | 2.5 | | | Time | Fall Time | tf | tf <100 ns 300 V | | 1.7 | | S | | Turn-off Time | toff | Duty cycle < 1% | | 2.1 | | | Thermal Resistance | Rth (i-c) | | | | 6.25 | oC/W | | | | | | | | |
RP10-2412SEW Price| AT16373 Fast LogicTM | | 16-Bit | | Transparent | | Latch | | AT16373F | | AT16373G | | 0756B |
RP10-2412SEW on stock Chip Enable(CE) The CE input is the device selection control. When CE goes high during a read operation the device is returned to standby mode. However, when the device is in the busy state during program or erase, CE high is ignored, and does not return the device to standby mode. | | _ | | | | | 1 1 ·6dBFS | | | | j | | | | | -- | | | | | | | | | ~dBFS | | | j | | | | | | | | | | | Ij | | | | -12dBFS | | | | | | | | | | | | | | | | | | | | | | | | | | |
|
