| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
RP5C15P Datasheet
RP5C15P Price The JTAG specifications defines two sets of commands to support boundary-scan testing: high-level commands and low-level commands. High-Ievel commands are executed via board test software on an a user test station such as automated test equipment, a PC, or an engineering workstation (EWS). Each high-level command comprises a sequence of low level commands These low-level commands are executed within the component under test, and therefore must be implemented as part of the TAP Controller design. The set of low-level boundary-scan commands implemented in the Philips P23128 is defined in Table 5. By supporting this set of low-level commands, the P23128 allows execution of all high-level boundary-scan commands. RP5C15P on stock All voltage values, except differential voltage, are with respect to network ground terminal. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. The magnitude of the input and the output voltages must never exceed the magnitude of the positive supply voltage Short circuit from outputs to Vcc+ can cause excessive heating and eventual destruction.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
