Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25YC at 0.20 mAf IC. 3. Derate above 25IC at 0.33 mA/IC. 4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds
SI4833DY-TI on stock| Model Number | Input Range | Output Voltage | Output Current | Input Current(7) | Eff4 (%) | Capacitor Load max |
| VKC03-24S05 | 9 - 36 VDC | 5VDC | 500mA | 147mA | 75 | 1000uF |
| VKC03-24S12 | 9 - 36 VDC | 12 VDC | 250mA | 169mA | 78 | 170uF |
| VKC03-24S15 | 9 - 36 VDC | 15 VDC | 200mA | 169mA | 78 | 110uF |
| VKC03-24D05 | 9 - 36 VDC | ±5VDC | ±250mA | 149mA | 74 | ±550uF |
| VKC03-24D12 | 9 - 36 VDC | ±12 VDC | ±125mA | 172mA | 77 | ±96uF |
| VKC03-24D15 | 9 - 36 VDC | ±15 VDC | ±100mA | 172mA | 77 | ±47uF |
| VKC03-48S05 | 18 - 75 VDC | 5VDC | 500mA | 74mA | 75 | 1000uF |
| VKC03-48S12 | 18 - 75 VDC | 12 VDC | 250mA | 85mA | 78 | 170uF |
| VKC03-48S15 | 18 - 75 VDC | 15 VDC | 200mA | 86mA | 77 | 110uF |
| VKC03-48D05 | 18 - 75 VDC | ±5VDC | ±250mA | 75mA | 74 | ±550uF |
| VKC03-48D12 | 18 - 75 VDC | ±12 VDC | ±'125mA | 86mA | 77 | ±96uF |
| VKC03-48D15 | 18 - 75 VDC | ±15VDC | ±'IOOmA | 85mA | 78 | ±47uF |
| | | | | | |
| | | | | | | | | | |
| | | | | (1) | (2) | (3) | I I (1)IF=10mA _ |
| | | | | | | | (2) I F = 1 F71A (3) lr = 0.5 mA._ |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| Oiode | insertec | I in seri | js with | a 5 | stripline | | | | |
| dlidiyLti ittllelWU Tamb :25'C. | | |
| | | | | | | | | |
