SI4904DY-T1 Datasheet| Parameter | Symbol | Rating | Units | | Drain-Source Voltage | vO | 65 | V | | Gate-Source Voltage | VGS | 20 | V | | Drain-Source Current | IDS | 12- | A | | Power Dissipation | P | 250 | w | | Junction Temperature | Tj | 200 | oC | | Storage Temperature | TsTG | - 55 to +150 | oC | | Thermal Resistance | eJc | 0.7 | cC/w | | | | |
SI4904DY-T1 Price| Collector-Emitter Breakdown Voltage IC = 100 mAdc 2N6058 2N6059 | V(BR)CEO | 80 100 | | Vdc | | Collector-Emitter Cutoff Current VCE = 40 Vdc 2N6058 VCE = 50 Vdc 2N6059 | ICEO | | 1.0 1.0 | mAdc | | Collector-Emitter Cutoff Current VCE = 80 Vdc, VBE = 1.5 Vdc 2N6058 VCE = 100 Vdc, VBE = 1.5 Vdc 2N6059 | ICEX | | 0.5 0.5 | mAdc | | Emitter-Base Cutoff Current VEB = 5.0 Vdc | IEBO | | 2.0 | mAdc | | | | | |
SI4904DY-T1 on stock| MODE OF OPERATION VCE V | IC(zs) A | f MHz | PL W | Gp dB | 11dt % | d3 dB | ds dB | | s.s.b. 28 (class-AB) | 0,1 | 1,6 - 28 | 175 (PEP) | > 11,5 | > 40 | < -30 | < -30 | | | | | | | | |
Mode 2 to Mode 0 : Select video signal format. 000 : Analog Through Mode 001 : M-PAL 010 : N-PAL 011 : PAL 100 : NTSC When Analog Through mode is selected, input video signals are output to Yout and Cout unchanged. In Analog Through mode, the delay time for output signals differs from those used for other modes. Therefore, when changing modes to Analog Through mode, to decide the input signal format, provide some delay time until an image is displayed. There is a case where a l LSB error voltage at frequency fsc is multiplexed with the output signal. When deciding the input signal format, to avoid an erroneous decision due to fsc leakage, be careful when setting the decision sensitivity (killer sensitivity). When the input signal is SECAM or 4.43 NTSC, select Analog Through mode. A separate BELL filter or a BPF is required.
|
