| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
SI7450DP-T1-LF Datasheet ON/OFF is controlled in the parallel mode ( P/S = "H") with the SHIFT (EMP) pin (pin 19). This is set in the serial mode ( P/S = "L") with a microcontroller or other equipment. (refer t0 10.2 microcontroller setting mode for further details on serial mode settings.) SI7450DP-T1-LF Price Stock Conditions: +lOoC to +600C relative humidity " 75% yearly average, without dew, maximum value for 30 da'/s-95% Vibration Resistance 24 cycles at 15 min. each (EN 60068-6) 10 - 60Hz at 0.75mm amplitude 60 - 2000Hz at 10g acceleration Lead Pull Strength 10N (EN 60068-2-21) Solderability 2600C, " 3 sec. (Wave) 3500C, " 1 sec. (Hand) SI7450DP-T1-LF on stock An alternate protection method is shownin Fig.18,whera a 51-ohm current-limiting resistor is inserted in series with Cx. Note that a smafl pulse width decrease wilt occur however, and Rx must be appropriately increased to obtain the originally desired pulse width. voo
|
