SI9100DJ-T1-E3，there are the best SI9100DJ-T1-E3 suppiers all over the world here.These are the list and detailed contact method of SI9100DJ-T1-E3 suppliers all over the world as follows.You can buy or get informations of SI9100DJ-T1-E3 through email , message or tel.

suppliers of SI9100DJ-T1-E3 and PDF data of SI9100DJ-T1-E3

Part Numbert	Mfg	Packt	D/C	Descriptiont	Qty	Company/Contact
SI9100DJ-T1-E3	VISHAY	DIP-14	08+		279	ARIAT TECHNOLOGY LIMTED Contact:Joe Choi Tel:86-852-30522530 Fax:86-852-30522540 Email: Joe@ariat.hk
SI9100DJ-T1-E3	VISHAY	DIP-14	07+08+		279	HK Hongly Electronics Technolo.. Contact:tracy Tel:86-755-82567627 Fax: Email: honglyic@gmail.com
SI9100DJ-T1-E3	VISHAY	NA	05+		0	sr weike Contact:rick Tel:86-755-83002013 Fax:86-755-83000013 Email: ddd@sr006.com

SI9100DJ-T1-E3 Datasheet

Pulse Discharge Characteristics 6
		load: 1.2A ------	3sec.On / 7sec. Off
4 o	:----
>		-200C 0 0c	200C
>	500 Cycles 1000 1500

SI9100DJ-T1-E3 Price

PIN DESCRIPTION AO-A18 - Addresslnputs DQO-DQ7 - Data In/Data Out CE - Chip Enable WE - Write Enable OE - Output Enable RST - Reset Output BW - Battery Warning Output Vcc - Power (+3.3 Volts) GND - Ground NC - No Connect
SI9100DJ-T1-E3 on stock

Frequency (kHz)	0.12	0.5	1	1 0	1 00	500	1 000	5000	10000
Impedance (ohm)	16.81	4.08	2.05	0.223	0.041	0.025	0.031	0.111	0.192
ESR (ohm)	0.22	0.11	0.08	0.048	0.032	0.024	0.025	0.025	0.025

Parameters	Values	Units	Conditions
lF(AV, Max.AverageForward (PerLeg)	30	A	50%duty cycle @ Te =1200C,rectangular wave form
Current (PerDevice)	60	A	50%duty cycle @ Te =1200C,rectangular wave form
lFRM Peak Repetitive Forward Current (Per Leg)	60	A	RatedVR,squarewave,20kHz Te =1270 C
IFSM Max.PeakOneCycleNon-Repetitive	1500	A	5psSineor3psRect.pulse	Following any rated load . condition and with rated
Surge Current (PerLeg)	300	A	10msSineor6msRect.pulse	VRRkn applied
EAS Non~RepetitiveAvalancheEnergy (PerLeg)	13	mJ	Tj=250C,IAS=3Amps,L=2.9mH
IAR RepetitiveAvalancheCurrent (PerLeg)	3	A	Current decaying linearty to ze ro in l psec Frequency limited by Tj max. VA = 1.5 x VR typical

Suppliers Datasheet
		Exact Matc