SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY，there are the best SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY suppiers all over the world here.These are the list and detailed contact method of SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY suppliers all over the world as follows.You can buy or get informations of SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY through email , message or tel.

suppliers of SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY and PDF data of SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY Datasheet

AIC1383 linear regulator is designed to achieve 1.5A source and sink current while regulating an output voltage to within 25mV. AIC1383 converts voltage supplies range from 1.6V t0 6V into an output voltage that adjusts by two external voltage divider resistors. It provides an excellent voltage source for active termination schemes of high-speed transmission lines as those seen in high-speed memory buses, and it meets the JEDEC SSTL- 2 and SSTL-3 specifications for termination of DDR-SRAM.
SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY Price


	f
	/ Normally Low Output
	7
j
					jr
		}	Jormally High Output
Single-	Ended Moc	e		\|
- Mode = 1				\|
- vcc = 5.0 V, VEE = -5.0 V I I

SI9165BQT1VISHAY SI9165BQT1VISHAY SI9165BQT1VISHAY on stock

(GHz)	sll		S21		S12		S22		UmaX (dB)
O1	0,884	- 18	6,93	163	0,017	77	1,018	-7
0,2	0,872	- 34	6,78	151	0,030	66	Ot943	-13	324
0,3	0,806	- 48	6,36	140	0,042	57	0,865	-19	26,6
0,4	0,767	- 63	5,97	130	Or050	52	0,805	-27	23,9
0,5	O718	- 75	6,43	123	0,056	46	0,823	-27	22,8
0,6	O685	- 88	5,09	115	0,061	42	0,732	-28	20,2
0,7	0,624	- 99	4,71	107	0,066	38	0,740	-33	1910
0,8	0,611	-109	4,38	100	0,069	36	0.711	-31	17.9
0,9	0,562	-121	4.13	94	0,072	33	0,634	-36	16,2
1,0	0,567	-127	3,82	89	0,074	32	0,702	-39	16,3
1,1	0,508	-138	3.60	84	0,076	31	0,647	-35	14,8
1,2	0,559	-144	3,33	79	0,077	30	0,617	-44	14,2
1,3	0,491	-148	3,11	76	0,078	28	0,631	-43	1 3,3
1,4	0,533	-157	2,91	72	0,080	27	0,627	-46	12,9
1,5	0,481	-158	2,71	67	0,079	27	0,618	-44	11,9
1,6	0.494	-166	2,61	64	0,081	27	0,608	-50	11,5
1,7	0,464	-168	2,44	61	0,082	27	0,621	-48	10,9
l8	0,475	-176	2,33	57	0.084	28	0,616	-52	10,5
1,9	0,477	-179	2,24	54	0,086	27	0,619	-50	10.2
2,0	0,467	176	2,16	51	0,089	28	0,599	-56	9,7

The combined TsP and VHYS specifications are due to Schmitt trigger inputs which provide noise and spike suppression. This eliminates the need for a Ti specification for standard operation. This parameter is not tested but guaranteed by characterization. For endurance estimates in a specific appli- cation, please consult the Total Endurance Model which can be obtained on our BBS or website.

Suppliers Datasheet
		Exact Matc