SI91844DT-285-T1，there are the best SI91844DT-285-T1 suppiers all over the world here.These are the list and detailed contact method of SI91844DT-285-T1 suppliers all over the world as follows.You can buy or get informations of SI91844DT-285-T1 through email , message or tel.

suppliers of SI91844DT-285-T1 and PDF data of SI91844DT-285-T1

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SI91844DT-285-T1 Datasheet

CONNECTION NOTES: 1 Pins are left unconnected when optional trim cir- cults are not used. Please see Note 2 . 2 0n eight and ten bit models (2853-56, 2858-61) when optional galn trim is not used, please connect REFERENCE OUT to REFERENCE IN unless an external reference is used. 3 Potentiometers should be Cermet 100ppm/oC). 4 For bipolar operation of twelve bit model 2851, please connect BIPOLAR OFFSET to REFERENCE OUT. 5 To select input voltage ranges on Model 2851, please use ANALOG INPUT l for - 10y/+5y ranges and ANALOG INPUT 2 for - 20W+10V ranges. 6 POWER GROUND and ANALOG GROUND are Internally connected.
SI91844DT-285-T1 Price

PARAMETER	AIGaAs RED	GREEN	RED ORANGE	UNIT
Power Dissipation Per Dot	36	36	36	mW
Peak Forward Current Per Dot	125	100	100	mA
Continuous Forward Current Per Dot Derating Linear From 250C Per Dot	15 0.20	13 0.17	13 0.17	mA mA/oC
Reverse Voltage Per Dot	5	5	5	V
Operating Temperature Range	-350Cto+850C
Storage Temperature Range	-350Cto+850C
Solder Temperature l/16 inch Below Seating Plane for 3 Seconds at 2600C

SI91844DT-285-T1 on stock

The PW-82520R is ideal for space and radiation tolerant applications requiring current regulation and/or holding torque at zero input com- mand. System applications that can use the PW-82520R are: pumps, actuators, antenna position, environmental control and reaction/momentum wheel systems using brushless and brush motors. Available in a l and 3 amp small DIP-style and a 10 amp flat- pack hybrid package, the PW-82520R is suitable for applications with limited printed circuit board area.

Bezeichnung Description	Symbol Symbol	Wert Value				Einheit Unit
Bezeichnung Description	Symbol Symbol	-2	13	·4	-5	Einheit Unit
Fotostrom, = 950 nm Photocurrent Ee = 0.5 mW/cm2, VCE = 5 V SFH 309: Ev = 1000 Ix, Normlicht/ standard light A, VCE = 5 V	IPCE IPCE	0.40.8 1.5	25 2.8	1.02.0 4.5	1.63.2 7.2	mA mA
Anstiegszeit/Abfallzeit Rise and fall time Ic = 1 mA, Vcc = 5 V, RL = 1 kl	tr4	5	6	7	8	o$
Kollektor-Emitter- Sattigungsspannung Collector-emitter saturation voltage Ic = IPCErTiinl) X 0.3, Ee = 0.5 mW/cm2	VCEat	200	200	200	200	mV

Suppliers Datasheet
		Exact Matc