SI91872DMP-30-T1，there are the best SI91872DMP-30-T1 suppiers all over the world here.These are the list and detailed contact method of SI91872DMP-30-T1 suppliers all over the world as follows.You can buy or get informations of SI91872DMP-30-T1 through email , message or tel.

suppliers of SI91872DMP-30-T1 and PDF data of SI91872DMP-30-T1

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SI91872DMP-30-T1 Datasheet

Symbol	Parameter	Test conditions	Min	Typ	Max	Unit
trr	Reverse recovery time	Tj = 25IC IF = 0.5A IR = 1A lrr= 0.25A IF = 1 A dIF/dt =-50Akcs VR =30V		28	55	ns
IRM	Maximum reverse recovery current	Tj = 1251C VR= 400V IF =12A dIF/dt = -96 A/as dIF/dt = -500 A/~s		16	7.5	A
S factor	Softness factor	Tj = 1251C VR = 400V IF =12A dIF/dt = -500 A/as		0.45

SI91872DMP-30-T1 Price

The third condition in which the problem occurs is when you enter Micro Power Off mode normally and then press the RESET button. While ~ORESET remains Low (indicating Micro Power Off mode), pressing the RESET button makes the RES~N signal pulse Low. This causes the ElanSC300 microcontroller to attempt to initialize itself and the PLLs to power up, indicated by LFl-LF4 going High immediately after RES~N goes Low. The timing for this scenario is not an issue, assuming that enough time has passed for the ElanSC300 microcontroller to properly enter Micro Power O mode before the RESET button is pressed.
SI91872DMP-30-T1 on stock

>	< >\|<

1 1 0IS 7		: tIH+I ' tlc0+1
××>\|<

5 4 L S 0 3 / D M 5 4 L S 0 3 / D M 7 4 L S 0 3 Q u a d 2 - I n p u t N A N D G a t e s w i t h O p e n - C o l l e c t o r O u t p u t s

Suppliers Datasheet
		Exact Matc