SI9434TRPBF，there are the best SI9434TRPBF suppiers all over the world here.These are the list and detailed contact method of SI9434TRPBF suppliers all over the world as follows.You can buy or get informations of SI9434TRPBF through email , message or tel.

suppliers of SI9434TRPBF and PDF data of SI9434TRPBF

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SI9434TRPBF Datasheet

Inputs The maximum magnitude of the differential input from D to D is VCC - VEE or 3.OV, whichever is less. This limit also applies to the difference between any reference voltage input and a single-ended input. The differential inputs have bias resistors that drive the outputs to a differential low when the inputs are open. The inverting input, D, is biased with a 60kQ pullup to VCC and a 100kQ pulldown to VEE. The noninverting input, D, is biased with a 100kQ pulldown to VEE. Specifications for the high and low voltages of the dif- ferential input (VIHD and VILD) and the differential input voltage (VIHD - VILD) apply simultaneously (VILD cannot be higher than VIHD).
SI9434TRPBF Price

unit -400 V - 400 V -5 v - 200 mA - 400 mA 1W 10 w 15 0 0C -55 to +150 0C min typ max unit - 0.1 vA - 0.1 pA 60X 200X 70 MHz - 0.8 V - 1.0 v - 400 V - 400 V -5 v Continued on next page.
SI9434TRPBF on stock

MIN 9	TYP 10	MAX 1 1	UNITS Q	Ri	Resistance
54	68	75	Q	R2	Resistance
80	100	120	pF	Cl	Capacitance
38	47	57	pF	C2	Capacitance
		1.0		ILEAK	Diode Leakage Current	VIN=5.OV
5 -5	7 -10	15 -15	V V	VSIG	Signal Voltage Positive Clamp Negative Clamp	ILOAD= lOmA
+15 +8			kV kV	VESD	In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4	Notes 2,4 and 5
	+15 -19		V V	VCL	Clamping Voltage during ESD Discharge MIL-STD-883 (Method 3015), 8kV Positive Transients Negative Transients	Notes 2,3,4 and 5
	34		MHz	fC1	Cut-off frequency l; Note 6	R = 10q C = lOOpF
	63		MHz	fC2	Cut-off frequency 2; Note 6	R = 68Q, C = 47pF
				Note 1 Note 2		TA=250C unless otherwise specified. ESD applied to input and output pins with respect to GND, one at a time.

These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such Improper use or sale.

Suppliers Datasheet
		Exact Matc