SIC8F360F513100 Datasheet CL includes probe and jig capacitance. Waveform l is for an output with internal conditions such that the output is low, except when disabled by the output control Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output contro All input pulses are supplied by generators having the following characteristics: PRR < 10 MHz, ZO = 50 Q, tr/tf = 3 ns. The outputs are measured one at a time, with one transition per measurement. tPLZ and tPHZ are the same as tdis. tPZL and tPZH are the same as ten. All parameters and waveforms are not applicable to all devices. SIC8F360F513100 Price| Parameter | Device Code | Unit | | 3970A | 3970B | 3970C | 3970D | 3970E | 3970F | | Channel Plan | 79 NTSC | 40 NTSC Low | 39 NTSC High | 112 NTSC | 60 PAL-D | 42 Cen- elec | | | Optical Output (min) | 7 Each | 7 Each | 7 Each | 7 Each | 7 Each | 7 Each | dBm | | Wavelength Range | 1540- 1 560 | 1540- 1 560 | 1540- 1 560 | 1540- 1 560 | 1540- 1 560 | 1540- 1 560 | nm | | Flatness (max) 42 MHz-750 MHz 42 MHz-870 MHz | 1.0 1.5 | 1.0 1.5 | 1.0 1.5 | 1.0 1.5 | 1.0 1.5 | 1.0 1.5 | dBp-p dBp-p | | RF Return Loss (min), 42 MHz-870 MHz | 1 6 | 16 | 16 | 16 | 1 6 | 16 | dB | | RF Input Level, CWi | 17-27 | 20-30 | 20-30 | 15.5-25.5 | 18-28 | 22-32 | dBmV/ channel | | Carrier-to-Noise Ratio (min), 65 km2, 3 | 52 | 55 | 55 | 49 | 52 | 52 | dB | | Composite Second Order (min)2, 3, | -65 | -70 | -70 | -60 | -65 | -65 | dBc | | Composite Triple Beat (min)2, 3, | -65 | -67 | -67 | -62 | -65 | -65 | dBc | | Cross Modulation (min)2, 3, 4, | -65 | -65 | -65 | -60 | -65 | -65 | dBc | | Number of Outputs5 | 2 | 2 | 2 | 2 | 2 | 2 | | | | | | | | | |
SIC8F360F513100 on stock| Symbol | Parameter | Conditions | Typ. | Max | Units | | VFM | Forward voltage | At 450A peak, Trnqp = 250C ' case | | 1.6 | V | | IRRM | Peak reverse current | At VRRM, Tcase = 1500C | | 20 | mA | | t | Reverse recovery time | | | 3.2 | 0S | | QRA1 | Recovered charge (50% chord) | IF = 450A, diRR/dt = 10N~ | | 35 | | | IRM | Reverse recovery current | T = 1250C, VR = 100V case | | 21 | A | | K | Soft factor | | | | | VTO | Threshold voltage | At T=1500C | | 1.0 | V | | rT | Slope resistance | At T=1500C | | 1.33 | ml | | VFRM | Forward recovery voltage | di/dt = 1000A/ccS. T, = 1250C | | | V | | | | | | |
| | | | | tp r I | | | | | | Lp | | | | IF | | | | | | ] | 1 | | | | | | --1 -I | | | | | | | | | | D= - 0.005 | | | | | | '. 0.1 0.2 I II | | - | S L 1 | | - | | ( ( ( | / . \1 1 ).0 ).0: ).0l | j | | | | | | ___ | | | 1 | | | s!IL | | | | | | | 0 5 | | | | | | ==! | § | | | | | | | | | | | -- | -_- | '-- | | §- | | | | | | | | | | | | - | | - | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|
