SID1010，there are the best SID1010 suppiers all over the world here.These are the list and detailed contact method of SID1010 suppliers all over the world as follows.You can buy or get informations of SID1010 through email , message or tel.

suppliers of SID1010 and PDF data of SID1010

Part Numbert

Mfg

Packt

D/C

Descriptiont

Qty

Company/Contact

SID1010 Datasheet

Before starting the demonstration, connect the evaluation board to a power supply and a load as shown in Figure la or Figure lb. Also, be sure that the evaluation board is connected to the DS9123 through the RJ-11 cable and that the DS9123 is plugged into an unused serial port on the computer.
SID1010 Price

Items	Symbols	Test Conditions	Min	Typ	Max	Units
]L·	VCBO	ICBO- 4mA	1200			V
]L·i-y	VCEO	lc=4mA	1200			V
	VCEO{SUS)					V
]L·-y	VCEX(SUS)	voE- - 3V	1200			V
-y^--	VEBO	IC.Bo-800mA	10			V
]LL	ICBO	Vceo - 1200V			4 0	mA
jyL	IEBO	VEEO= 10V			800	mA
- 7-]L1	VECO	IECO= 300A			2.0	V
		lc-300A, vca=sv	100
	hFE	:c=300A, vCE-2.8v, Tj-1250C	75
]L---y	VCE<Sat)	I			2.8	V
·	VBE(Sal)	lc=300A, IB=4.OA"			3.5	V
	tOn	lc=300A			3.0	cS
ry>	t5tg	IBl= +4.OA			15.0	S
ry>	tf	IB2- -6.OA			2.0	5
	trr	IF=300A			0,8	S
	Ed	IBl=+4.OA,IB2=6.OA, Pw=50kts	750			V
fF7_J	Vz	1z=120mA	30		40	V
1y--F	VFZ	IF-4A '			1 5	V

SID1010 on stock

Eight GLBs, 32 110 cells, two dedicated inputs and two ORPs are connected together to make a Megablock (see Figure l). The outputs of the eight GLBs are connected to a set of 32 universal l/0 cells by the two ORPs. Each ispLSI 2096VE device contains three Megablocks.

1. ELECTRONIC CIRCUIT BREAKER The electronic circuit breakerTD230 is the conven- ient solution for any industrial who wants at the same time : ..immediate, efficient and resettable protection for his equipment coversatility regarding different applications ~easy and quick design-in 0low component count low cost The electronic circuit breaker TD230 is to be used with a minimal amount of external and low cost components to drive one or two N-channel MOS- FETs (in respectively single or dual supply applica- tions) used as power switches between the DC power supplies and the equipments to be protected. The TD230 immediately reacts (3as max. without load) whenever an over current is detected by switching off the corresponding MOSFET. Several automatic restart attempts are made unless the fault persists over an externally adjustable amount

Suppliers Datasheet
		Exact Matc