SIL10E-051V2-V Datasheet| Bit 6 | Bit 5 | Cursor Behavior | | 0 | 0 | No blinking | | 0 | 1 | Cursor not displayed | | 1 | 0 | Blinking with 16 . refresh rate | | 1 | 1 | Blinking with 32 . refresh rate | | | |
SIL10E-051V2-V Price| PIN DESCRIPTION | (Cont.) | | | | | Pin No. Pin No. | Pin No | Pin No. | | | | (TC530 (TC530 | (TC534 | (TC534 | | 28-Pin 28-Pin | 40-Pin | 44-Pin | | PDIP, 300 Mil.) SOIC) | PDIP) | PQFP) | Symbol | Description | | 22 22 | 32 | 30 | VCCD | Analog Input. Power supply connection for digitallogic and serial port. Proper power-up sequencing is critical, see the Applications section. | | 23 23 | 34 | 32 | OSC | Input. The negative power supply converter normally runs at a frequency of 100kHz. This frequency can be slowed down to reduce quiescent current by connecting an external capacitor between this pin and V~. (See Typical Characteristics). | | 25 25 | 37 | 35 | VDD | Analog Input. Power supply connection for the ND analog section and DC-DC converter. Proper power-up sequencing is critical, see the Applications section. | | 26 26 | 38 | 36 | CAP+ | Analog Input. Storage capacitor positive connection for the DC/DC converter. | | 27 27 | 39 | 37 | AGND | Analog Input. Ground connection for DC/DC converter. | | 28 28 | 40 | 38 | CAP- | Analog Input. Storage capacitor negative connection for the DC/DC converter. | | 13, 24 13, 24 | 28,29,31 | 1,25,26,27 | NC | No connect. Do not connect any signal to these pins. | | 33, 35, 36 | 29, 31, 33, 34, 39, 44, | | | | | |
SIL10E-051V2-V on stock| | | | | | | MARKING | 2SD1007 | HR | HQ | HP I | | hFE | 90 - 180' | 135 - 270 | 200 - 400 J | | | | | |
| Sym | Description | Test Conditions* | Min | Typ | Max | Units | | | Instrinsic Jitter (4Hz to lOOkHz Filter) | | | | 0.015 | UIpp | | | Instrinsic Jitter (10Hz t0 40kHz Filter) | | | 0.010 | UIpp | | | Instrinsic Jitter (8kHz t0 40kHz Filter) | 1-12, 19-22, 28 | | | 0.010 | UIpp | | | Instrinsic Jitter (10Hz t0 8kHz Filter) | | | 0.005 | UIpp | | | | | | | |
|
