|
|
| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact | |
| SN65175D | TI | SOP16 | 08+ | 全新 | 2000 |
|
 |
| SN65175D | TI/BB | SOP16 | 08+ | New | 4500 |
|
|
| SN65175D | TI | 16-SOIC (3 | 07+ | ★全新 ㊣原装 ▲现货 | 5600 |
|
|
| SN65175D | TI | SOP16 | 1709 |
|
|||
| SN65175D | TI | 2006+ | New original | 609 |
|
||
| SN65175D | TI | New origin | 2006+ | 609 |
|
||
| SN65175D | TI | 2006+ | New original | 609 |
|
||
| SN65175D | N/A | TI | 04+ | 5000 |
|
|
SN65175D Datasheet The square wave that the LT1934 produces at its switch pin results in atriangle wave of current in the inductor. The LT1 934 limits the peak inductor current to ILIM. Because SN65175D Price NOTES: 1. 00 to +700C temperature range only. 2. -550C to +1250C temperature range only. 3. This parameter is guaranteed with the AC Load (Figure 2) by device characterization, but is not production tested Dropout Voltage The dropout voltage of a regulator is defined as the minimum input-to-output differential required to stay within 2% of the output voltage. The RT9172 uses an internal MOS-FET with an RDS(ON) 160mQ. For CMOS LDOs, the dropout voltage is the product of the load current and the RDS(ON) of the internal MOSFET. NOTES FOR STABLE AND SAFE OPERATION ; ~ Design the PCB pattern to minimize wiring length between opto-coupler and IPM's input terminal, and also to minimize the stray capacity between the input and output wirings of opto-coupler. ~ Connect low impedance capacitor between the Vcc and GND terminal of each fast switching opto-coupler. ~ Fast switching opto-couplers: tPLH, tPHL " 0.8ffs, Use High CMR type. ~ Slow switching opto-coupler: CTR > 100% ~ Use 4 isolated control power supplies (VD). Also, care should be taken to minimize the instantaneous voltage charge of the power supply. ~ Make inductance of DC bus line as small as possible, and minimize surge voltage using snubber capacitor between P and N terminal. ~ Use line noise filter capacitor (ex. 4.7nF) between each input AC line and ground to reject common-mode noise from AC line and improve noise immunity of the system. |
