suppliers of STD1NK80Z1 and PDF data of STD1NK80Z1

The MIC5156, MIC5157, and MIC5158 Super Low-Dropout (LDO) Regulator Controllers are single IC solutions for high- current low-dropout linear voltage regulation. Super LDOTM Regulators have the advantages of an external N-channel power MOSFET as the linear pass element. The MIC51 56/7/8 family features a dropout voltage as low as the RDS(ON) of the external power MOSFET multiplied by the output current. The output current can be as high as the largest MOSFETs can provide. The MIC5156/7/8 family operates from 3V t0 36V. The MIC5156 requires an externalgate drive supply to provide the higher voltage needed to drive the gate of the external MOSFET. The MIC5157 and MIC5158 each have an internal charge pump tripler to produce the gate drive voltage. The tripler is capable of providing enough voltage to drive a logic- level MOSFET t0 3.3V output from a 3.5V supply and is clamped t0 17.5V above the supply voltage. The tripler requires three external capacitors. The regulator output is constant-current limited when the controller detects 35mV across an optional external sense resistor. An active-low open-collector flag indicates a low voltage of 8% or more below nominal output. A shutdown (low) signal to the TTL-compatible enable control reduces controller supply current to less than l.q while forcing the output voltage to ground. The MIC5156-3.3 and MIC5156-5.0 controllers have inter- nally fixed output voltages. The MIC5156 [adjustable] output is configured using two external resistors. The MIC5157 is a fixed output controllerwhich is externally configu red to select
STD1NK80Z1 Price