| Part Numbert | Mfg | Packt | D/C | Descriptiont | Qty | Company/Contact |
|
STF202-30TC Datasheet The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. STF202-30TC Price Stresses beyond those listed under 'Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied Exposure to absolute maximum rating conditions for extended periods may af fect device reliability. STF202-30TC on stock all bank interleaving reads, IOUT = OmA; BL = 4, CL = CL(IDD), AL = tRCD (IDD) -1 x tCK (IDD) tCK = tCK (IDD), tRC = tRC (IDD), tRRD = tRRD(IDD), mA tRCD = 1 x tCK (IDD); CKE is H. CS is H between valid commands: The Baud Rate Generator divides the clock by a divisor programmable from l t0 216_1 to provide standard RS-232C baud rates when using any one of three industry standard baud rate crystals (1.8432MHz, 2.4576MHz, or 3.072MHz). A programmable buffered clock output (BAUDOUT) provides either a buffered oscillator or 16X (16 times the data rate) baud rate clock for general purpose system use. |
