STI9400A60T Datasheet| | | | | | | | j | | | | | | | | j | | | | | | | | j | | jj | | | | VGS | =4V | | | j | | | | | j | | j | VGS | =10 | | | | | | r | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ID= 4.0A | | | | | | | | |
STI9400A60T Price| CHARACTERISTIC | SYMBOL | TEST CONDITION | | TYP. | UNIT | | Vcc | | Total Harmomc Distortion (T.H.D) | | fIN=lkHz, VIN=4VPP (Vcc=4.5V) RL=lOk Q, VIN=8VPP (Vcc=9.OV) CL=50pF | 4.5 9.0 | 0.05 0.04 | % | | Maximum Propagation Frequency (SWITCH ON) | fMAX | Adjust fIN voltage to obtain OdBm at Vos Increase fIN frequency until dB Meter reads -3dB. RL=50Q, CL=lOpF, fIN=lMHz, Sine Wave | 4.5 9.0 | 200 200 | MHz | | Feedthrough (SWITCH ON) | | Vin is ceintered at Vcc/2 Adjust input for OdBm RL=600 Q, CL=50pF, fIN=lMHz, Sine Wave | 4.5 9.0 | -60 -60 | dB | | Crosstalk (CONTROL SWITCH) | | RL=600 Q, CL=50pF, IN=1MHz, PULSE (tr=tf=6ns) | 4.5 9.0 | 60 100 | mV | | | | | | |
STI9400A60T on stock| Package | Temperature | Description | Frequency | MC Order Number | | 84-Pin PLCC | -20Ito+ 70IC | Custom ROM | 1 MHz | MC68L11K4FN1 | | 3 MHz | MC68L11K4FN3 | | No ROM | 1 MHz | MC68L11KIFN1 | | 3 MHz | MC68L11KIFN3 | | No ROM, No EEPROM | 1 MHz | MC68L11KOFN1 | | 3 MHz | MC68L11KOFN3 | | Custom ROM, No EEPROM | 1 MHz | MC68L11K3FN1 | | 3 MHz | MC68L11K3FN3 | | 80-Pin QFP | -20Ito + 70IC | Custom ROM | 1 MHz | MC68L11K4FU1 | | 3 MHz | MC68L11K4FU3 | | No ROM | 1 MHz | MC68L11KIFU1 | | 3 MHz | MC68L11KIFU3 | | No ROM, No EEPROM | 1 MHz | MC68L11KOFU1 | | 3 MHz | MC68L11KOFU3 | | Custom ROM, No EEPROM | 1 MHz | MC68L11K3FU1 | | 3 MHz | MC68L11K3FU3 | | | | | |
MSEL (Pin 20) Unconnected, this pin is held at approximately l.9V by an internal resistor divider. Pulling this pin below 0.9V enables the 2.5VMEM output and disables 3.3VMEM output. Pulling it above 2.9V enables the 3.3VMEM output (typical voltage levels) and disables 2.5V output. Leaving the pin open enables both memory regulators.
|
